SUBWOOFER MODE
Press SUBWOOFER MODE on the unit or SW MODE on the remote controller.
SW indicator lights up when SW Mode 1, SW Mode 2 or SW Mode 3 is selected.
With the first press of the button, you can check the present setting. Then each press of the button changes the subwoofer mode as follows (a tip on how to select the right subwoofer mode is in parentheses):
→ SW Mode 1
(When small–with limited bass signal handling–front speakers are
connected)
↓
SW Mode 2
(When large–wideband–front speakers
are connected)
↓
SW Mode 3
(When large–wideband speakers are
connected to all channel)
↓
SW Off
(When no subwoofer is connected)
The initial setting varies depending on the area which it was purchased.
North American and South American model: SW Mode 1
Other models: SW Mode 2
The normal display resumes in three seconds.
Selecting the Subwoofer mode

Unit

Before operating the remote controller

Press MODE AUDIO.

The remote controller remains in the AUDIO mode, until another MODE button is pressed.

SW MODE

Remote controller

31