Onkyo D0901-2 Troubleshooting, There’s no sound, The onscreen display doesn’t appear on your TV

Models: DS-A3

1 20
Download 20 pages 23.52 Kb
Page 17
Image 17
Troubleshooting

Troubleshooting

There’s no sound

Make sure your iPod is actually playing.

Make sure your iPod is inserted properly in the RI Dock.

Make sure your amp is turned on, the correct input source is selected, and the volume is turned up.

Make sure the plugs are pushed in all the way.

Make sure the AC adapter is connected to a suit- able wall outlet and connected to the RI Dock.

The RI Dock’s remote controller doesn’t control your iPod

If the RI Dock is placed on top of another compo- nent, the remote controller’s signal may be obstructed and the remote controller may not work reliably. In this case, try repositioning the RI Dock.

Make sure your iPod is properly inserted in the RI Dock.

When you use the RI Dock’s remote controller, point it toward the RI Dock (see page 8).

Some of the remote controllers buttons work dif- ferently depending on the OSD mode: On or Off (see page 7).

Your amp’s remote controller doesn’t con- trol your iPod

Make sure your iPod is properly inserted in the RI Dock.

If your amp’s remote controller has remote mode buttons, make sure you’ve selected the right mode.

Check the RI Dock’s RI MODE switch setting.

When you use your amp’s remote controller, point it toward your amp.

The RI Dock must be connected to your amp with

both an ■There’s no sound■The RI Dock’s remote controller doesn’t control your iPod cable and an audio cable.

Make sure the RI Dock’s RI MODE switch setting and the remote control mode match this setting. See your amp’s manual for more information.

If you still can’t control your iPod, start playback by pressing your iPod’s Play button. Remote opera- tion should then be possible.

Make sure your amp’s remote controller is set to the correct remote control ID.

The onscreen display doesn’t appear on your TV

Set the OSD mode to On (see page 10).

Try setting the TV system to PAL or NTSC (see page 14).

Select the video output mode (composite/compo- nent) according to the video input on your TV (see page 10).

To watch an iPod slideshow or video on TV:

Set the OSD mode to Off, and use your iPod’s con- trols or remote controller to select and start the slideshow or video.

17

Page 17
Image 17
Onkyo D0901-2, DS-A3 Troubleshooting, There’s no sound, The RI Dock’s remote controller doesn’t control your iPod