Using the RI Dock
Setting the OSD Mode
Set the OSD (onscreen display) mode before you start using the RI Dock.
1.Plug in the AC adapter.
2.Turn on your TV and amp, and select the appropriate inputs on your TV and amp.
3.Insert your iPod into the RI Dock.
Notes:
•To prevent dock connector damage, don’t twist your iPod when inserting or removing it, and be careful not to knock over the RI Dock while your iPod is inserted.
•Don’t use the RI Dock with any other iPod accessories, such as FM transmitters and microphones, because they may cause a malfunction.
•You can’t change the OSD mode while watching an iPod slideshow or video.
4.Select the video output mode depending on the video connection.
While pressing the remote controller's
[SETUP] button, press the Up [
] button for the component video connection, press the [
] button for the composite (default) connection.
5. Use the remote controller’s [MODE] button to set the OSD mode.
On: Playlists (artists, albums, songs, and so on) are displayed on your TV, and you can navigate and select your music or video while looking at your TV. While this mode is selected, your iPod dis- plays the Onkyo logo.
Off: Nothing is displayed on your TV and you navigate and select your contents by using your iPod’s display.
Controlling Your iPod without the OSD
To control your iPod without the OSD, set the OSD mode to Off, and use the remote control- ler as explained on page 7.
Controlling Your iPod with the OSD
When the OSD mode is set to On and your iPod is inserted in the RI Dock, you can navigate and select your music or video on your TV.
10
