1Using the supplied AV cable, connect the DS-A5’s AUDIO OUT L/R jacks to a audio input on your Onkyo amp or AV receiver. And if your iPod/iPhone/iPad supports TV out, connect the DS-A5’s VIDEO OUT jack to a composite video input on your Onkyo amp, AV receiver or TV.

2Using the supplied ucable, connect the DS-A5’s ujack to an ujack on your Onkyo amp or AV receiver.

3Connect the supplied AC adapter to the DS-A5’s DC IN 5V 3A jack, and plug the AC adapter into a suitable wall outlet.

Note

Do not place the DS-A5 on top of a component that gets warm or one with has air vents on top, as it may interfere with that component’s cooling or cause the component or DS-A5 to overheat. Place it next to the component, use an audio rack, etc.

Caution

Connect the supplied ucable to only ujacks. Do not connect headphones to the ujack, as it will damage your equipment.

Inserting Your iPod/iPhone/iPad into the DS-A5

Insert your iPod/iPhone/iPad into the DS-A5 as shown below.

iPod/iPhone/iPad

Now, you can enjoy music/video from iPod/iPhone/iPad.

Note

To prevent dock connector damage, don’t twist your iPod/iPhone/iPad when inserting or removing it, and be careful not to knock your iPod/iPhone/iPad while it’s inserted.

Don’t use your iPod/iPhone/iPad with any other accessories, such as FM transmitters and microphones, because they may cause a malfunction.

18

Page 18
Image 18
Onkyo instruction manual Inserting Your iPod/iPhone/iPad into the DS-A5, IPod/iPhone/iPad