Onkyo DV-BD507 instruction manual Others

FUNCTION SETUP

■ Others

Others

Angle Icon	On
Auto Power Off	On
Panel Display	Auto
HDMI CEC	On
Media Select	Disc
Network Connection	Enable(Easy)
Software Upgrade

•For how to select the setting items and options, refer to “Custom” on page 34.

	Setting items				Options
	Angle Icon	On*:
		The angle icon appears on the TV screen when playing back the scene with various
		angle.
		Off:
		The angle icon disappears on the TV screen.
	Auto Power Off	On*:
		If this unit is left with no activity for more than 30 minutes, this unit turns into the
		standby mode automatically.
		Off:
		Sets off the auto power off.
	Panel Display	Auto*:
	Sets the brightness of the	Front panel display gets darker during playback.
	front panel display.
		Bright:
		Front panel display gets brighter.
		Dimmer:
		Front panel display gets darker.
	HDMI CEC	On*
	Sets whether to utilize
		Off
	HDMI CEC function.
	Media Select	Disc*:
	Selects the media to	Select this when you play back a disc.
	playback.	SD Card:
	Setting will be back to	Select this when you play back an SD Memory Card.
	“Disc” when you turn the
	unit to the standby mode.
	Network Connection	Connection					Perform the network connection
		Test					test. After you change the IP
							address or DNS setting, always
							perform this test.
		Enable(Easy)*					If you select “Enable(Easy)”,
							Connection test will automatically
							start.
		Enable	IP Address	Auto(DHCP)*			Set the IP address.
		(Custom)	Setting				In most cases, you can connect
				Manual		IP Address
							to the Internet without making
						Subnet Mask
							any changes to the default
						Default	setting.
						Gateway
			DNS	Auto(DHCP)*			Set the DNS setting.
			Setting				In most cases, you can connect
				Manual		Primary DNS
							to the Internet without making
						Secondary
							any changes to the default
						DNS	setting.
EN							43