If the video source is connected to a component

16, 34

video input, you must assign that input to an input

 

selector, and your TV must be connected to either

 

the HDMI OUT or COMPONENT VIDEO MONI-

 

TOR OUT.

 

If the video source is connected to a composite video

16

input, your TV must be connected to the HDMI

 

OUT or the corresponding composite video output.

 

 

 

If the video source is connected to an HDMI input,

15, 34

you must assign that input to an input selector, and

 

your TV must be connected to the HDMI OUT.

 

 

 

On your TV, make sure that the video input to which — the AV receiver is connected is selected.

■There’s no picture from a source connected to an HDMI IN

Reliable operation with an HDMI-to-DVI adapter is 65 not guaranteed. In addition, video signals from a PC are not guaranteed.

When the Resolution is set to any resolution not sup- 34 ported by the TV, no video is output by the HDMI outputs.

If the message Resolution Error appears on the AV — receiver’s display, this indicates that your TV does

not support the current video resolution and you need to select another resolution on your DVD player.

■The on-screen menus don’t appear

On your TV, make sure that the video input to which — the AV receiver is connected is selected.

When the AV receiver doesn’t connect TV with

—

HDMI, onscreen menus are not displayed.

 

 

 

■The on screen display does not appear

Depending on the input signal, the on screen display 43 may not appear when the input signal from the

HDMI IN is output to a device connected to the

HDMI OUT.

Tuner

■Reception is noisy, FM stereo reception is noisy, or the FM STEREO indicator doesn’t light

Relocate your antenna.

—

Move the AV receiver away from your TV or com-

—

puter.

 

Listen to the station in mono.

25

 

 

When listening to an AM station, operating the

—

remote controller may cause noise.

 

Passing cars and airplanes can cause interference.

—

 

 

Concrete walls weaken radio signals.

—

If nothing improves the reception, install an outdoor

—

antenna.

 

Remote Controller

■The remote controller doesn’t work

Before operating this unit, be sure to press

—

RECEIVER.

 

 

 

Make sure that the batteries are installed with the

4

correct polarity.

 

 

 

Install new batteries. Don’t mix different types of

4

batteries, or old and new batteries.

 

 

 

Make sure that the remote controller is not too far

4

away from the AV receiver, and that there’s no

 

obstruction between the remote controller and the

 

AV receiver’s remote control sensor.

 

Make sure that the AV receiver is not subjected to

—

direct sunshine or inverter-type fluorescent lights.

 

Relocate if necessary.

 

 

 

If the AV receiver is installed in a rack or cabinet

—

with colored-glass doors, the remote controller may

 

not work reliably when the doors are closed.

 

Make sure you’ve selected the correct remote con-

9, 57

troller mode.

 

 

 

When using the remote controller to control other

—

manufacturers’ AV components, some buttons may

 

not work as expected.

 

Make sure you’ve entered the correct remote control

56

code.

 

 

 

Make sure to set the same ID on both the AV receiver

44

and remote controller.

 

 

 

■ Can’t control other components

If it’s an Onkyo component, make sure that the u

17

cable and analog audio cable are connected properly.

 

Connecting only an ucable won’t work.

 

 

 

Make sure you’ve selected the correct remote con-

9, 57

troller mode.

 

If you’ve connected a cassette tape deck, to the TV/

22

CD IN jack, or an RI Dock to the TV/CD IN or

 

GAME IN or VCR/DVR IN jacks, for the remote

 

controller to work properly, you must set the display.

 

 

 

If you cannot operate it, you will need to enter the

55

appropriate remote control code.

 

To control another manufacturer’s component, point

56

the remote controller at that component.

 

 

 

To control an Onkyo component that’s connected via

56

u, point the remote controller at the AV receiver.

 

Be sure to enter the appropriate remote control code

 

first.

 

To control an Onkyo component that’s not connected

56

via u, point the remote controller at the compo-

 

nent. Be sure to enter the appropriate remote control

 

code first.

 

 

 

The entered remote control code may not be correct.

—

If more than one code is listed, try each one.

 

 

 

UP-A1 Dock for iPod

■ There’s no sound

Make sure your iPod is actually playing.

—

Make sure your iPod is inserted properly in the

—

Dock.

 

Make sure the UP-A1 Dock is connected to the UNI- —

VERSAL PORT jack on the AV receiver.

 

 

 

Make sure the AV receiver is turned on, the correct

—

input source is selected, and the volume is turned up.

 

Make sure the plugs are pushed in all the way.

—

 

 

Try resetting your iPod.

—

 

 

■ There’s no video

Make sure that your iPod’s TV OUT setting is set to —

En

On.

 

61

Page 60 Page 62
Page 61
Image 61
Onkyo HT-RC260 There’s no picture from a source connected to an Hdmi, On-screen menus don’t appear, There’s no sound
Page 60 Page 62

HT-RC260 specifications

The Onkyo HT-RC260 is a versatile and powerful home theater receiver designed to enhance your audio-visual experience. While it may not be the latest model on the market, its combination of features and technologies makes it an excellent choice for those looking to create a rich and immersive entertainment environment.

One of the standout features of the HT-RC260 is its robust amplification system. This receiver provides 7.2 channels of surround sound, delivering up to 100 watts per channel. This level of power ensures that your home theater can fill a room with dynamic sound, making every movie, music track, or game come to life. The receiver also supports various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, allowing for a cinematic experience at home.

Connectivity options abound with the HT-RC260. It includes multiple HDMI inputs, accommodating various devices such as Blu-ray players, game consoles, and streaming devices. The HDMI ports support 3D video and 4K passthrough, ensuring compatibility with the latest video technologies. Additionally, the receiver features analog and digital audio inputs, allowing you to connect legacy devices with ease.

The Onkyo HT-RC260 also integrates advanced calibration technology known as AccuEQ. This feature automatically measures the characteristics of your room and adjusts the audio output for optimal sound quality. As a result, users can enjoy consistent audio experiences regardless of room size or shape.

For those who value convenience, the HT-RC260 supports network streaming services. Users can access popular platforms like Spotify, Pandora, and TuneIn via built-in Wi-Fi. Additionally, the receiver can connect to home networks via Ethernet, expanding your listening options and making it easy to enjoy your favorite music.

The user interface is straightforward, with an intuitive on-screen display that simplifies setup and operation. The included remote control allows easy access to all functions, making it user-friendly even for those who may not be tech-savvy.

In summary, the Onkyo HT-RC260 is an excellent choice for home theater enthusiasts. With its powerful amplification, diverse connectivity, advanced audio calibration, and network streaming capabilities, it offers a well-rounded solution for anyone seeking to elevate their audiovisual experience. Whether you are watching films, playing video games, or listening to music, the HT-RC260 provides an engaging and harmonious soundstage that will enhance your enjoyment for years to come.
Top Page Image Contents