Onkyo instruction manual Turning On and Listening to AM and FM Radio, Turning On the T-4555P

T-4555P_En.book Page 19 Wednesday, August 9, 2006 3:42 PM

Turning On and Listening to AM and FM Radio

Listening to AM and FM Radio

STANDBY/ON TUNING/CH

STANDBY indicator	TUNING MODE
	BAND

1	Press the [BAND] button repeat-
	edly to select AM or FM.
	The	or	indicator lights up.

Remote controller

STANDBY/ON

TUNING/CH /

TUNING MODE

BAND

2

Remote controller

Press the [TUNING MODE] but- ton repeatedly to select Auto or Manual Tuning mode.

•Auto Tuning Mode

The AUTO indicator appears and stereo radio reception is possible.

•Manual Tuning Mode

The MONO indicator appears and radio reception will be in mono.

AUTO indicator

MONO indicator

Turning On the T-4555P

1	Connect the power cord to a suit-
	able wall outlet.

Note:

The MONO indicator does not light up if the installed tuner board supports HD Radio technology.

•Auto Tuning Mode

The AUTO indicator appears.

•Manual Tuning Mode

AUTO indicator disappears.

2	Press the [STANDBY/ON] button
	on the T-4555P or remote con-
	troller.

The T-4555P turns on, and the

STANDBY indicator goes off.

Remote controller

To turn off the T-4555P, press the [STANDBY/ON] button. The T-4555P will enter Standby mode.

Note that the T-4555P is not com- pletely shutdown in Standby mode.

3

Remote controller

Use the TUNING/CH []/[ ] but- tons to tune into a station.

In Auto Tuning mode, once a station is found, tuning stops automatically. The American model changes FM fre- quency in 0.2 MHz steps, 10 kHz steps for AM.

For other models, it’s 0.05 MHz steps for FM and 9 kHz or 10 kHz steps for AM.

In Manual Tuning mode, the frequency stops changing when you release the buttons. Press the buttons repeatedly to change the frequency one step at a time.

19