Onkyo T-4555P Displaying XM Radio Information, Positioning the XM antenna, No Signal, Loading

T-4555P_En.book Page 24 Wednesday, August 9, 2006 3:42 PM

Listening to XM Satellite Radio—Continued

DISPLAY DISPLAY

SETUP

ENTER

NO SIGNAL

The signal is too weak. Check the XM Mini-Tuner and/or antenna connection and reposition it for the best reception.

LOADING

The T-4555P is tuning or decoding audio or text data. Please wait.

OFF AIR

The XM channel you selected is not currently broad- casting. Select another channel.

Displaying XM Radio Information

Press the [DISPLAY] button repeatedly to cycle through the available information.

Positioning the XM antenna

You can check the signal strength of the XM Radio sig- nal and adjust the position of the XM antenna accord- ingly.

1	Press the [SETUP] button.
Remote controller

Channel name

Channel number

&preset number

Category

Artist name

Song title

Note:

Channel number

Preset number

2	Use the Up and Down Arrow
Remote controller	[ ]/[ ] buttons to select
	“Antenna Aiming,” and then
	press [ENTER].

3	Adjust the position of the XM
	antenna so that the satellite
	(SAT) signal strength bar is as
	long as possible.

If you can’t receive the satellite (SAT) signal, adjust your XM antenna so that

If the category, artist, or song title is not available, “- - -” will be displayed instead.

■XM Radio Messages

The following messages may appear while using XM Radio.

CHECK ANTENNA

The XM Mini-Tuner and/or antenna is not connected properly. Check the connection.

UPDATING

The XM user encryption code is being updated. Please wait.

the terrestrial (TER) signal strength bar is as long as possible.

Press the Down Arrow [ ] button to display the terrestrial (TER) signal bar.

Terrestrial signals are only available in certain areas.

So long as the signal strength is good, you can enjoy XM Radio by using either satellite or terrestrial reception.

24