Onkyo instruction manual Changing the Remote ID, Changing the T-4555P’sRemote ID, buttons

T-4555P_En.book Page 28 Wednesday, August 9, 2006 3:42 PM

Changing the Remote ID

If the T-4555P’s remote controller interferes with other Onkyo components located in the same room, you can change the remote control ID. You can select remote control ID #1, #2, or #3. By default, the remote control ID is set to #1. If you change the ID, you must also change the ID on the remote controller to match, as explained below, otherwise, the remote controller won’t work.

Number buttons
RETURN	SETUP
/ / /	ENTER

Changing the T-4555P’s Remote ID

1	Press the [SETUP] button.
Remote controller

2	Use the Up and Down Arrow
Remote controller	[ ]/[	] buttons to select “Hard-
	ware Setup,” and then press
	[ENTER].
	With some tuner boards, there will
	only be one option available and you
	won’t need to use the Up and Down
	Arrow [	]/[ ] buttons.

4	Use the Left and Right Arrow
Remote controller	[ ]/[ ] buttons to change the
	remote ID.
	You can select ID #1 (default), #2, or
	#3.
5	Press the [SETUP] button.
Remote controller	Once you’ve changed the T-4555P’s
	remote ID, the remote controller will
	no longer control the T-4555P, so you
	must change the remote controller’s ID
	to match, as explained below.
Changing the Remote Controller’s ID
1	Before changing the remote con-
	troller’s ID, change the T-4555P’s
	ID first (see above).
2	Press the remote controller’s
Remote controller	[RETURN] button.
3	While pressing and holding
Remote controller	down the remote controller’s

[RETURN] button, press number button [1], [2], or [3] for 3 sec- onds to select ID #1, #2, or #3 respectively.

4	Check whether the remote con-
	troller operates the T-4555P
	properly.

3

Remote controller

Use the Up and Down Arrow []/[ ] buttons to select “Remote ID.”

With some tuner boards, there will only be one option available and you won’t need to use the Up and Down Arrow []/[ ] buttons.

Note:

•The remote controller and T-4555P must be set to the same remote control ID. Otherwise, you won’t be able to control the T-4555P with the remote control- ler.

28