Onkyo TX-DS474 appendix Recording a source, Turntable, Tape deck, CD player, Vcr, Vdp, Monitoring

Recording a source

1					2
										MASTER VOLUME
STANDBY/ON								PARAMETER SELECTOR
	STANDBY
POWER								PARAMETER CONTROLLER
	SCAN GROUP		PRESET					TUNING
				HIGH CURRENT DISCRETE OUTPUT STAGE AMPLIFIER
ON OFF
	A SPEAKERS	B	SURROUND MODE		MIDNIGHT THEATER		DIMMER	MEMORY FM MUTE/MODE
								CLEAR	BASS	TREBLE
PHONES	MULTI CH INPUT	DVD	VIDEO 1	VIDEO 2	TAPE(MONITOR)	FM	AM	PHONO	C D
									AUDIO VIDEO CONTROL RECEIVER TX-DS474
1·3										3
									Turntable
	Tape deck								CD player
	(TAPE)								VCR, VDP
									DVD
2	DVD		VIDEO 1			VIDEO 2
FM	AM				PHONO				C D

Recording an audio source

Make all connections between the tape deck and the receiver as shown in the “Audio equipment connections” diagram (page 6).

1. Insert a blank tape into the tape deck.

2. Press the input selector button for the source you want to record.

• If you select DVD, VIDEO-1 or VIDEO-2, only the audio will be recorded.

• If you select FM or AM, set the tuner to the station you want to record.

3.Set the tape deck in recording mode. Start playing the source.

Set the proper recording level using the controls on the tape deck.

•Please read the corresponding instruction manuals for more information on how to operate the corresponding equipment.

TAPE(MONITOR)

Monitoring

If the tape deck has three heads, the signal just recorded can be monitored:

Press the TAPE (MONITOR) button. The TAPE MONITOR indi- cator appears on the display.

To stop monitoring, press the TAPE (MONITOR) button again. The TAPE MONITOR indicator turns off.

•You cannot use the monitor function with the MULTI-CH INPUT button turned on.

•Refer to the tape deck’s instruction manual for more details.

24