Specifications
AMPLIFIER SECTION
Continuous Average Power |
| ||
output (FTC) |
|
|
|
All channels: |
| 55 watts per channel min. RMS at | |
|
|
| 8 ohms, 2 channels driven from 20 Hz |
|
|
| to 20 kHz with no more than 0.08% |
|
|
| total harmonic distortion. |
|
|
| 70 watts min. RMS at 6 ohms, 2 chan- |
|
|
| nels driven from 1 kHz with no more |
|
|
| than 0.1% total harmonic distortion. |
Continuous Power output (DIN) | 75 watts ⋅ 5 at 6 ohms | ||
Maximum Power output (EIAJ) | 100 watts ⋅ 5 at 6 ohms | ||
Total Harmonic Distortion: | 0.08% at rated power (Front) | ||
IM Distortion: |
|
| 0.08% at rated power (Front) |
Damping Factor: |
| 60 at 8 ohms (Front) | |
Input Sensitivity and Impedance |
| ||
PHONO: |
|
| 2.5 mV, 50 kohms |
LINE (CD, | TAPE, | DVD, |
|
| 200 mV, 50 kohms | ||
MULTICHANNEL INPUT |
| ||
(FRONT | L/R, | SUR- |
|
ROUND L/R, CENTER): 200 mV, 50 kohms | |||
(SUBWOOFER): |
| 36 mV, 50 kohms | |
0.5 | |||
VIDEO IN |
|
|
|
(DVD, | 1 | ||
Output Level and Impedance |
| ||
Rec out (TAPE, | |||
Pre out (SUBWOOFER): | 1 V, 2.2 kohms | ||
VIDEO OUT |
|
|
|
Phono Overload: |
| 110 mV RMS at 1 kHz, 0.5% T.H.D. | |
Frequency Response: |
| 20 Hz to 30 kHz, ±1 dB | |
RIAA Deviation: |
| 20 Hz to 20 kHz, ±0.8 dB | |
Tone Control |
|
|
|
Bass: |
|
| ±10 dB at 100 Hz |
Treble: |
|
| ±10 dB at 10 kHz |
|
| ||
Phono: |
|
| 80 dB (IHF A, 5 mV input) |
CD/Tape: |
|
| 100 dB (IHF A) |
VIDEO SECTION
Signal sensitivity and | 1 |
impedance: | (DVD, |
| put) |
TUNER SECTION
FM
Tuning Range: | 87.5 — 108.0 MHz |
Usable Sensitivity |
|
Mono: | 11.2 dBf, 1.0 ∝V (75 ohms) |
Stereo: | 18.2 dBf, 2.2 ∝V (75 ohms) |
50 dB Quieting Sensitivity |
|
Mono: | 18.2 dBf, 2.2 ∝V (75 ohms) |
Stereo: | 39.2 dBf, 24 ∝V (75 ohms) |
Capture Ratio: | 1.5 dB |
Image Rejection Ratio |
|
U.S.A. & Canadian models: 40 dB | |
Other area models: | 85 dB |
IF Rejection Ratio: | 90 dB |
| |
Mono: | 73 dB |
Stereo: | 67 dB |
Alternate Channel Attenuation: 55 dB | |
Selectivity: | 50 dB (DIN) |
AM Suppression Ratio: | 50 dB |
Total Harmonic Distortion |
|
Mono: | 0.15% |
Stereo: | 0.25% |
Frequency Response: | 30 Hz — 15 kHz, ±1.5 dB |
Stereo Separation: | 45 dB at 1 kHz |
| 30 dB at 100 Hz — 10 kHz |
AM
Tuning Range
U.S.A. & Canadian models:
European & Australian | |
models: |
|
Worldwide models: | |
| |
Usable Sensitivity: | 30 ∝V |
Image Rejection Ratio: | 40 dB |
IF Rejection Ratio: | 40 dB |
40 dB | |
Total Harmonic Distortion: | 0.7% |
GENERAL
Power Supply: | AC 120 V, 60 Hz |
| AC 230 V, 50 Hz |
| AC |
| 50/60 Hz |
Power Consumption: | 3.3 A |
| 240 W |
Dimensions (W ⋅ H ⋅ D): | 435 ⋅ 150 ⋅ 324 mm |
| |
Weight: | 9.5 kg, 20.9 lbs. |
| 10.7 kg, 23.6 lbs. |
REMOTE CONTROL |
|
Transmitter: | Infrared |
Signal range: | Approx. 5 meters, 16 ft. |
Power supply: | Two “AA” batteries (1.5 V ⋅ 2) |
Specifications and features are subject to change without notice.
Power supply and voltage vary depending on the area in which the unit is purchased.
27
