Connecting to the IR IN MAIN input

Outline

If the TX-DS787 is located inside a cabinet or other enclosure where the infrared beams from the remote controller cannot enter, then operation with the remote controller will not be possible. In such a case, it will be necessary to install a remote sensor at a location outside of the cabinet for the infrared beams from the controller to reach.

1.Connect the connecting block to the IR IN MAIN input at the TX-DS787.

2.Install the remote sensor at a location where it can detect the infrared beams from the remote controller.

3.Connect the remote sensor to the connecting block.

Power supply

Wall outlet

Connecting block

Remote sensor

Remote controller

In the cabinet

Outside of the cabinet

Mini plug cable

ANTENNA

AM

FM

 

 

75

IR IN

ZONE 2

MAIN

R LVIDEO

TX-DS787

25