Input Setup

2-3. Listening Mode Preset sub-menu

With the TX-DS787, you can set a different listening mode for each different signal type that comes from each input source and also set the parameters for the listening mode itself. For example, if your DVD player also plays compact discs and the DVD video signal is DTS and the compact disc signal is PCM, then you can set a different listening mode for each.

This is especially convenient if you frequently play the same types of movies or music.

Menu

1.Speaker Setup 2.Input Setup 2.Input Setup

Input:DVD 3.Listening Mode Setup

4.Preference

2a-.3Aud.ListeningModeSetup Preset

5.OSD Setup b.VideoInput:DVDSetup

c.Listening Mode Preset da..Tone2ch SCourcentrol e.IntelliVolume:Stereo

f.12V Trigger ENTER Quit:OSD

b.PCM fs=96k :Stereo

c.Multichannel,MonoENTERQuit:OSD Source :Surround

Quit:OSD

*The 5.1-channel digital surround format has a variety of versions including Dolby Digital and DTS. The 5.1- channel digital surround format enables you to individually record and play five full-range (20 Hz to 20 kHz) channels (left and right front, center, and two surround channels) plus an LFE channel (Low Frequency Effect) for the low-range effect sound. It will create a realistic sound that can be heard in the theaters and concert halls.

Input source signals

a. 2ch Source

Set a listening mode for the input signal from 2-channel analog sources, PCM sources, and 2/0-channel Dolby Digital and DTS sources.

b. PCM fs=96k

Set a listening mode for the input signal from digital PCM sources recorded with a sampling rate of 96 kHz.

c. Multichannel, Mono Source

Set a listening mode for the input signal from 2/1, 2/2, 3/0, 3/2- channel Dolby Digital and DTS sources. Or, set a listening mode for the input signal from 1/0-channel (Mono) Dolby Digital and DTS sources.

•The TX-DS787 will automatically switch to the listening mode set for the current input signal. For example, even when using the same DVD player, if a CD is played, the listening mode automatically becomes “Stereo,” and if a DVD is played (Dolby Digital 3/2.1), the listening mode automatically becomes Dolby D.

Relationship between input source and listening mode

Input source signal (display)

2ch

PCM fs=96k

Multichannel, Mono

Type of software

Tape, CD,

DVD

DVD, LD,

 

Record, Tuner

 

Digital satellite

 

DVD Video (Stereo), LD (Stereo)

 

broadcast

 

Digital satellite

 

DTS-CD

Listening Mode

broadcast

 

 

Direct

●

●

 

Stereo

●

●

●

Theater-Dimensional

●

 

●

Surround

●

 

●

 

(Pro Logic (3 Stereo),

 

(DolbyD,

 

DolbyD, DTS)

 

Dolby D/6.1, DTS,

 

 

 

DTS-ES)

THX

●

 

●

 

(Cinema)

 

(Cinema,

 

 

 

Surround EX)

 

 

 

 

Mono Movie

●

 

●

Enhanced 7

●

 

●

Orchestra

●

 

●

Unplugged

●

 

●

Studio-Mix

●

 

●

TV Logic

●

 

●

 

 

 

 

All Ch Stereo

●

 

 

The listening modes that can be set are different for each input source format.

Note:

You may not be able to select all the listening modes shown here depending on your speaker configuration or the selected input source.

37