Onkyo TX-DS787 OSD Setup

OSD Setup

5. OSD Setup menu

This menu provides settings for you to customize the on-screen display (OSD) for the TX-DS787 by setting different colors or positions for its display.

1.Speaker Setup 5.OSD Setup 2.Input Setup

3.Listening Mode Setup

4.Preference 1.OSD Config

5.OSD Setup 2.OSD Setup

3.OSD Position

ENTER Quit:OSD

5-1. OSD Config sub-menu

1.Speaker Setup 5.OSD Setup 2.Input Setup

3.Listening Mode Setup

4.Preference 51-.1OSD.OSDConfig

5.OSD Setup 2.OSD Setup

3.OSD Position

a.OSD Output :S Video

b.TV Format :Auto ENTER Quit:OSD

ENTER Quit:OSD

Quit:OSD

a. OSD output

This setting allows you to set the output of the OSD Menu. Select the video terminal to which your monitor is connected: “S VIDEO” or “VIDEO.”

S Video: Outputs the OSD Menu through the S VIDEO MONITOR OUT terminals.

Video: Outputs the OSD Menu through the VIDEO MONITOR OUT terminals.

Note:

If the OSD Menu is not displayed on the television monitor you are using, confirm whether the television is connected to an S VIDEO MONITOR OUT terminal or VIDEO MONITOR OUT terminal.

b. TV format

(For all models other than USA and Canadian models)

The default setting is “Auto,” which means that the television format is detected and automatically set by the TX-DS787. However, if you know the correct format, you can use this setting to choose either PAL or NTSC so that no time is wasted on detection.