Speaker Setup
1. Speaker Setup menu
After you have installed the
Before you perform the following settings, it is important that you first determine the following characteristics:
•The types and sizes of the speakers that are connected.
•The distance from each speaker to your normal listening position.
Menu
1.Speaker Setup 1.Speaker Setup 2.Input Setup
3.Listening Mode Setup
4.Preference 1.Speaker Config 5.Zone2 OSD Setup 2.Speaker Distance 6.About
3.Level Calibration 4.Bass Peak Level
5.LFE Level Setup
Select: Exit:EXIT Enter:ENTER Quit:OSD
Quit:OSD
Memo:
|
|
| Monitor |
|
|
Front |
| SW | Center |
| Front |
|
|
|
| ||
| [ | ] | [ | ]m/ft |
|
|
| m/ft |
| ||
|
|
|
|
| |
[ | ]m/ft |
| [ | ]m/ft |
| [ |
| ]m/ft |
SL |
|
| SR |
[ | ]m/ft |
|
|
[ | ]m/ft | [ | ]m/ft |
SBLSBR
Tip:
When setting the speaker size in the Speaker Config
Large: The complete frequency range for the channel you are setting will be output from the speaker.
Small: Frequencies of the channel you are setting lower than 80 Hz will be output from the subwoofer.If the front speakers are set to “Large,” then the sound may be output from both the left and right speakers. (All THX speakers are small.)
Here you will enter which speakers are connected and the size of each speaker.
Menu
1.Speaker Setup 1.Speaker Setup 2.Input Setup
3.Listening Mode Setup
4.Preference
3.Level Calibration
4.aBass.SubwooferPeak Level:Yes
5.bL.FErontLevel :Large
Select: Exit:EXIT
c.Center :Large Enter:ENTER Quit:OSD
d.Surround L/R
:Large
e.Surround BackQuit:OSD :Large
Quit:OSD
a. Subwoofer
Yes: Select when a subwoofer is connected.
No: Select when a subwoofer is not connected.
b. Front
Large: Select if the front speakers are large sized.
Small: Select if the front speakers are small sized.
•If “No” is selected for the Subwoofer setting, then this setting is fixed to “Large.”
c.Center
None: Select if no center speaker is connected.
Large: Select if the center speaker is large sized.
Small: Select if the center speaker is small sized.
•If “Small” is selected for the Front setting, then “Large” cannot be selected for this setting.
d.Surround L/R
None: Select if no surround left and right speakers are connected.
Large: Select if the surround left and right speakers are large sized.
Small: Select if the surround left and right speakers are small sized.
•If “Small” is selected for the Front setting, then “Large” cannot be selected for this setting.
e.Surround Back
None: Select if no surround back left and right speakers are connected.
Large: Select if the surround back left and right speakers are large sized.
Small: Select if the surround back left and right speakers are small sized.
•If “None” is selected for the Surround L/R setting, then this setting is fixed to “None.”
•If “Small” is selected for the Surround L/R setting, then “Large” cannot be selected for this setting.
30