Onkyo TX-DS989 Preference

Preference

4. Preference menu

This menu provides settings for you to customize certain functions of the TX-DS989 as you wish.

123456789012345678901234 1.Speaker Setup

14.Preference

22.Input Setup

33.Listening4.PreferenceMode Setup

4 1.Volume Setup

55.Zone26.About OSD Setup

6 2.OSD Setup

8 3.OSD Tweak

Select: Exit:EXIT 9

Enter:ENTER Quit:OSD 0

2Quit:OSD

4-1. Volume Setup sub-menu

This sub-menu allows you to make various settings concerning the volume control of the TX-DS989.

123456789012345678901234 1.Speaker Setup

14.Preference

22.Input Setup

3.Listening Mode Setup

3 123456789012345678901234 4.Preference

4141-.1Volume.SetupSetup 5.Zone2 OSD Setup

6.About

632a..OSDVolumeSetupDisplay

74:Absolute

853b..OSDMutingTweakLevel
Select:		Exit:EXIT
96		:-50dB
Enter:ENTER Quit:OSD
07	c.Maximum Volume
18		:Off
29	d.Power	On VolumeQuit:OSD
0		:Last
1

2Quit:OSD

a. Volume Display

You can choose from two ways of displaying the volume setting on screen.

Absolute: This displays the volume with a minimum of min

(0)for no sound and a maximum of max (100). As a reference, the volume setting of Ref (82) is used as the 0 -decibel for the relative display method.

Relative: This displays the volume as a decibel value on a scale with a designated reference point that is displayed as 0, which equals the volume setting of 82 for the absolute display method. With this display method, the minimum value is -∞ , the next highest is -81, and the maximum value is +18.

b. Muting Level

This sets the attenuation level during playback when the Muting button is pressed on the remote controller. This can be set between -∞ , -50 and -10 decibels in 10-decibel increments.

c. Maximum Volume

This sets a maximum limit for the master volume to reduce the chance of any components becoming damaged from accidental increases to the volume. For the absolute volume display method, this can be set between 50 and 90. For the relative volume display method, this can be set between -32 and +17 decibels.

d. Power On Volume

This sets a designated volume setting for the TX-DS989 to be set every time that the power is turned on. This prevents the TX- DS989 from being turned on while it is set to an extremely high volume and suddenly output very loud sounds. For the absolute volume display method, this can be set between 0 and 99. For the relative volume display method, this can be set between -∞and +18 decibels. If you do not mind having the TX-DS989 turned on with its current volume setting, set this to “Last Valid.”