Connecting antennas
Connecting the included antennas
Connecting the FM indoor antenna:
The FM indoor antenna is for indoor use only. During use, extend the antenna and move it in various directions until the clearest signal is received. Fix it with push pins or similar implements in the position that will cause the least amount of distortion.
If the reception is not very clear with the attached FM indoor antenna, the use of an outdoor antenna is recommended.
Connecting the AM loop antenna:
The AM loop antenna is for indoor use only. Set it in the direction and position where you receive the clearest sound. Put it as far away as possible from the
When reception is not satisfactory with the attached AM loop antenna alone, connection of an outdoor antenna is recommended.
(indoor) AM loop antenna
Assembling the AM loop antenna
Assemble the loop antenna as shown in the illustration.
•Refer to the next page for details on connecting the AM loop antenna.
Insert into the hole.
U.S. and Canadian models
ANTENNA
AM
FM antenna
FM 75
Strip away the insulation from the end of the cable, then fully insert the stripped end of the cable.
Connecting the AM antenna cable
1.Press down the lever.
2.Insert the wire into the hole.
3.Release the lever.
1 | 2 | 3 |
22