UP-A1 Dock for iPod/iPhone, Recording, Zone 2/3

For a proper operation of the remote controller as a	41
cassette tape deck is connected to the TV/CD IN
jack, or as an RI Dock is connected to the TV/CD
IN, VCR/DVR IN or GAME IN jacks, you must set
the input display accordingly.

If you cannot operate it, you will need to enter the	73
appropriate remote control code.
To control another manufacturer’s component, point	74
the remote controller at that component.

If none of the codes work, use the Learning function	77
to learn the commands of the other component’s
remote controller.
To control an Onkyo component that’s connected	74
via u, point the remote controller at the AV
receiver. Be sure to enter the appropriate remote
control code first.

To control an Onkyo component that’s not	75
connected via u, point the remote controller at the
component. Be sure to enter the appropriate remote
control code first.

The entered remote control code may not be correct. — If more than one code is listed, try each one.

When learning commands, make sure that the	—
transmitting ends of both remote controllers are
pointing at each other.

Are you trying to learn from a remote controller that — cannot be used for learning? Some commands

cannot be learned, especially those that contain several instructions.

UP-A1 Dock for iPod/iPhone

Make sure your iPod/iPhone is actually playing.	—
Make sure your iPod/iPhone is properly inserted in	—
the Dock.
Make sure the UP-A1 Dock is connected to the	—
UNIVERSAL PORT jack on the AV receiver.

Make sure the AV receiver is turned on, the correct —
input source is selected, and the volume is turned up.
Make sure the plugs are pushed in all the way.	—

Try resetting your iPod/iPhone.	—

Make sure that your iPod/iPhone model’s TV OUT — setting is set to On.

Make sure the correct input is selected on your TV	—
or the AV receiver.
Some versions of the iPod/iPhone do not output	—
video.

■The AV receiver’s remote controller doesn’t control my iPod/iPhone

	Make sure your iPod/iPhone is properly inserted in	—
	the Dock. If your iPod/iPhone is in a case, it may not
	connect properly to the Dock. Always remove your
	iPod/iPhone from the case before inserting it into the
	Dock.
En	The iPod/iPhone cannot be operated while it’s	—
En	displaying the Apple logo.

Make sure you’ve selected the right remote mode.	23
When you use the AV receiver’s remote controller,	—
point it toward your AV receiver.
When connecting the UP-A1 Dock to the radio tuner	—
UP-HT1(North American models)/UP-DT1
(European, Australian and Asian models) with
AUTO selected with the tuner’s Mode Selector
switch, you can switch the input source between the
UP-A1 Dock and the tuner, by pressing PORT
repeatedly on the front panel.

If you still can’t control your iPod/iPhone, start	—
playback by pressing your iPod/iPhone model’s Play
button. Remote operation should then be possible.
Try resetting your iPod/iPhone.	—

Depending on your iPod/iPhone, some buttons may	—
not work as expected.

■The AV receiver unexpectedly selects your iPod/iPhone as the input source

Always pause iPod/iPhone playback before selecting — a different input source. If playback is not paused,

the Direct Change function may select your iPod/iPhone as the input source by mistake during the transition between tracks.

■iPod/iPhone doesn’t work properly

Try reconnecting your iPod/iPhone.—

On your recorder, make sure the correct input is	—
selected.

To prevent signal loops and damage to the AV	—
receiver, input signals are not fed through to outputs
with the same name (VCR/DVR IN to VCR/DVR
OUT).
When the Pure Audio listening mode is selected,	—
recording is not possible because no video signals
are output. Select another listening mode.

■There’s no sound

Only components connected to analog inputs can be — played in Zone 2/3.

Powered Zone 2 cannot be used if “Speakers	47
Type(Front)” is set to “Bi-Amp”.

To use the Zone 2 speakers, you must set the “Pow-	47
ered Zone 2” setting to “Yes”.

Check the network connection between the AV	—
receiver and your router or switch.

Make sure that your modem and router are properly	—
connected, and make sure they are both turned on.
Make sure the server is up and running and	94, 96
compatible with the AV receiver.