Playing Your AV Components—Continued
Using the Multichannel Input
ON/STANDBY
REMOTE MODE
RECEIVER |
|
| RECEIVER | DVD |
|
|
| TAPE |
|
| INPUT SELECTOR |
| ||
| 1 | 2 | 3 | CD |
| V1 | V2 | V3 |
|
MULTI CH | 4 | 5 | 6 | MD |
| ||||
|
| MULTI CH | DVD |
|
| 7 | 8 | 9 | CDR |
| TAPE | TUNER | CD |
|
| +10 | 0 | CLR | HDD |
| DIMMER | SLEEP |
| |
|
|
| CH | VOL |
|
|
| DISC | |
|
|
| ALBUM |
|
The multichannel input is for connecting a component with individual
You can display various information about the current input source as follows.
RECEIVER | Press the [RECEIVER] button, |
| and then press the [DISPLAY] |
| button repeatedly to cycle |
| through the available informa- |
DISPLAY | tion. |
The following information can typically be displayed for input sources.
Input source & volume*1
Signal format*2 or sampling frequency
RECEIVER
MULTI CH
Press the [RECEIVER] button fol- lowed by the [MULTI CH] button so that MULTI CH indicator appears on the display.
Audio from the multichannel input will now be used for the DVD input source.
MULTI CH indicator
Input source & listening mode
*1 When AM or FM radio is used, the band, preset num- ber, and frequency are displayed.
*2 If the input signal is analog, or AM or FM radio is selected, no format information is displayed. If the input signal is PCM, the sampling frequency is dis- played. If the input signal is digital but not PCM, the signal format is displayed. Information is displayed for about 3 seconds, then the previous display reap- pears.
Note:
•While the multichannel input is selected, the Speaker Configuration settings on page 34 are ignored, and signals from the multichannel input are fed to the front left, front right, center, surround left, and surround right speakers and subwoofer regardless of those set- tings.
Displaying Source Information
ON/STANDBY
REMOTE MODE
RECEIVER |
|
| RECEIVER | DVD |
|
|
| TAPE |
|
| INPUT SELECTOR |
| ||
| 1 | 2 | 3 | CD |
| V1 | V2 | V3 |
|
|
| 5 | 6 | MD |
| AUDIO SUBTITLE |
|
| |
| TEST TONE | CH SEL | LEVEL- | LEVEL+ |
DISPLAY |
| PLAY MODE |
|
|
DISPLAY |
| L NIGHT | CINE FLTR | |
|
|
| ||
Interpreting Surround Channel Information
AB C
A:The number of front channels (front left, front right, and center).
B:The number of surround channels (surround left and surround right). If there’s surround back channel information, this number will be 3.
C:LFE channel for subwoofer (1 means yes).
37
