PORTABLE CART WARNING

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

 

AVIS

RISK OF ELECTRIC SHOCK

 

RISQUE DE CHOC ELECTRIQUE

DO NOT OPEN

 

NE PAS OUVRIR

 

 

 

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safeguards

1.Read Instructions—All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions—The safety and operating instructions should be retained for future reference.

3.Heed Warnings—All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions—All operating and use instructions should be followed.

5.Cleaning—Unplug the appliance from the wall outlet before cleaning. The appliance should be cleaned only as recom- mended by the manufacturer.

6.Attachments—Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.

7.Water and Moisture—Do not use the appliance near water –for example, near a bath tub, wash bowl, kitchen sink, or laun- dry tub; in a wet basement; or near a swimming pool; and the like.

8. Accessories—Do not place the appli- ance on an unstable cart, stand, tripod, bracket, or table. The appliance may fall, causing serious injury to a child or adult, and serious damage to the appli-

13.Power Cord Protection—Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

14. Outdoor Antenna Grounding—If an outside antenna or cable system is connected to the appliance, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides infor- mation with regard to proper grounding of the mast and support- ing structure, grounding of the lead-in wire to an antenna- discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure 1.

15.Lightning—For added protection for the appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and discon- nect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges.

16. Power Lines—An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines

ance. Use only with a cart, stand, tri- pod, bracket, or table recommended by the manufacturer, or sold with the

S3125A

or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

appliance. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting acces- sory recommended by the manufacturer.

9.An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

10.Ventilation—Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the appliance and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the appliance on a bed, sofa, rug, or other similar sur- face. The appliance should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. There should be free space of at least 8 in. (20 cm) and an open- ing behind the appliance.

11.Power Sources—The appliance should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.

12.Grounding or Polarization—The appliance may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

2

17.Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

18.Object and Liquid Entry—Never push objects of any kind into the appliance through openings as they may touch danger- ous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance.

19.Servicing—Do not attempt to service the appliance yourself as opening or removing covers may expose you to dangerous volt- age or other hazards. Refer all servicing to qualified service per- sonnel.

20.Damage Requiring Service—Unplug the appliance form the wall outlet and refer servicing to qualified service personnel under the following conditions:

A.When the power-supply cord or plug is damaged,

B.If liquid has been spilled, or objects have fallen into the appli- ance,

C.If the appliance has been exposed to rain or water,

D.If the appliance does not operate normally by following the operating instructions. Adjust only those controls that are cov- ered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to its normal operation,

E.If the appliance has been dropped or damaged in any way, and

F.When the appliance exhibits a distinct change in performance – this indicates a need for service.

Page 2
Image 2
Onkyo TX-SR501E instruction manual Important Safeguards

TX-SR501E specifications

The Onkyo TX-SR501E is a versatile home theater receiver that delivers quality audio performance and a range of features designed to enhance your multimedia experience. With a solid build and an array of connectivity options, it caters to both audiophiles and casual users alike.

One of the standout features of the TX-SR501E is its robust amplification system. It boasts a power output of 80 watts per channel, ensuring that your home theater setup receives ample power for a dynamic listening experience. This is complemented by Onkyo’s wide-range amplifier technology, which provides clear and precise sound reproduction across a variety of audio formats. Whether you're watching movies or listening to music, the receiver’s high current capabilities contribute to improved transient response and overall sound clarity.

The TX-SR501E supports multiple audio formats, including Dolby Digital and DTS, making it a great choice for both home theater enthusiasts and music lovers. The receiver is equipped with a 5.1 channel configuration, allowing you to fully immerse yourself in surround sound, perfect for movie nights or gaming sessions. It also includes various sound modes, enabling customization based on your preferences.

In terms of connectivity, the Onkyo TX-SR501E does not disappoint. It features multiple HDMI inputs, allowing for easy connections with modern devices, such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it includes composite and component video inputs, so you can easily integrate older equipment into your setup. The receiver's outputs include a subwoofer pre-out, making it simple to connect an external subwoofer for enhanced bass response.

Another noteworthy characteristic is the inclusion of Onkyo’s own proprietary technologies, such as the Music Optimizer, which enhances the sound quality of compressed audio files. This feature works well with digital music formats, ensuring that your playlists sound as good as possible, regardless of the source.

The user interface of the TX-SR501E is intuitive, featuring an easy-to-navigate remote and an on-screen display that simplifies setup and operation. This makes it accessible for users of varying technical expertise.

Overall, the Onkyo TX-SR501E is a well-rounded home theater receiver that combines power, flexibility, and excellent sound quality, making it an ideal choice for anyone looking to elevate their audio experience. Whether you're a seasoned enthusiast or new to home theater systems, the TX-SR501E offers the performance and features you need to enjoy your favorite media to the fullest.