Precautions—Continued

1.Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder.

2.AC Fuse—The AC fuse inside the TX-SR501/TX-SR501E is not user-serviceable. If you cannot turn on the TX-SR501/ TX-SR501E, contact your Onkyo dealer.

3.Care—Occasionally you should dust the TX-SR501/ TX-SR501E all over with a soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water. Dry the TX-SR501/TX-SR501E immediately after- wards with a clean cloth. Don’t use abrasive cloths, thinners, alcohol, or other chemical solvents, because they may damage the finish or remove the panel lettering.

4.Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.

AC outlet voltages vary from country to country. Make sure that the voltage in your area meets the voltage requirements printed on the TX-SR501/TX-SR501E’s rear panel (e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).

The Worldwide model has a voltage selector for compatibility with power systems around the world. Before you plug in this model, make sure that the voltage selector is set to the correct voltage for your area.

Setting the [STANDBY/ON] switch to STANDBY does not fully shutdown the TX-SR501/TX-SR501E. If you do not intend to use the TX-SR501/TX-SR501E for an extended period, remove the power cord from the AC outlet.

Memory backup

The TX-SR501/TX-SR501E uses a battery-less memory backup system in order to retain radio presets and other settings when it’s unplugged or in the case of a power failure. Although no batteries are required, the TX-SR501/TX-SR501E must be plugged into an AC outlet in order to charge the backup system.

(On non-North American models, the TX-SR501/ TX-SR501E’s POWER switch must be set to ON in order to charge the backup system.) Once it has been charged, the TX-SR501/TX-SR501E will retain the settings for several weeks, although this depends on the environment and will be shorter in humid climates.

Supplied Accessories

Make sure you have the following accessories:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Only supplied in certain countries. Use

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

this adapter if your AC outlet does not

 

Indoor FM antenna

 

match with the plug on the TX-SR501/

 

 

TX-SR501E’s power cord. (Adapter var-

 

(connector type varies from

 

 

 

ies from country to country.)

AM loop antenna

country to country)

Power-plug adapter

 

 

Front Left Front Left

SP-B / Zone 2

Left

SP-B / Zone 2

Left Front Right Front Right

SP-B / Zone 2

Right

SP-B / Zone 2

Right Surround Left Surround Left Surround Right Surround Right Center Center

Surround Back Left

Surround Back Left Zone 2

Left Zone 2

Left

Surround Back Right

Surround Back Right Zone 2

Right Zone 2

Right

 

 

 

Front Left Front Left

SP-B / Zone 2

Left

SP-B / Zone 2

Left Front Right Front Right

SP-B / Zone 2

Right

SP-B / Zone 2

Right Surround Left Surround Left Surround Right Surround Right Center Center

Surround Back Left

Surround Back Left Zone 2

Left Zone 2

Left

Surround Back Right

Surround Back Right Zone 2

Right Zone 2

Right

 

 

 

 

 

 

1

 

 

2

 

 

 

 

 

 

 

 

 

Not supplied with North American and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

Speaker Cable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

European models.

Remote controller &

Speaker cable labels

75/300-ohm antenna

 

adapter

 

two batteries (AA/R6)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*In catalogs and on packaging, the letter added to the end of the product name indicates the color of the TX-SR501/TX-SR501E. Specifications and operation are the same regardless of color.

Features

Amp

6-channel amplifier

65 watts per channel into 8 ohms, 20 Hz–20 kHz with less than 0.08% total harmonic distortion

WRAT (Wide Range Amplifier Technology)

Optimum gain volume circuitry

Audio/Video

Dolby*1 Digital EX and Dolby Pro Logic II

DTS, DTS-ES Matrix/Discrete 6.1, and DTS Neo:6 pro- cessing*2

Cinema Filter function

Advanced 24-bit DSP chip (5 DSP soundfields)

Linear PCM 96 kHz/24-bit D/A converters on all channels

Adjustable crossover (60, 80, 100, 120, 150 Hz)

2 component video inputs, 1 output

4 S-Video inputs, 2 outputs

3 assignable digital inputs (2 optical, 1 coaxial)

Subwoofer pre out

Color-coded multi-channel inputs

Color-coded speaker terminal posts (SPEAKERS B use push-type terminals)

FM/AM Tuner

30 FM/AM presets

FM auto tuning

RDS (Radio Data System) (Europe only)

*1. Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” Surround EX,” and the double-D symbol are trademarks of Dolby Laborato- ries.

*2. “DTS,” “DTS-ES Extended Surround,” and “Neo:6” are trademarks of Digital Theater Systems, Inc.

4

Page 4
Image 4
Onkyo TX-SR501E instruction manual Supplied Accessories, Features, Amp, Audio/Video, FM/AM Tuner

TX-SR501E specifications

The Onkyo TX-SR501E is a versatile home theater receiver that delivers quality audio performance and a range of features designed to enhance your multimedia experience. With a solid build and an array of connectivity options, it caters to both audiophiles and casual users alike.

One of the standout features of the TX-SR501E is its robust amplification system. It boasts a power output of 80 watts per channel, ensuring that your home theater setup receives ample power for a dynamic listening experience. This is complemented by Onkyo’s wide-range amplifier technology, which provides clear and precise sound reproduction across a variety of audio formats. Whether you're watching movies or listening to music, the receiver’s high current capabilities contribute to improved transient response and overall sound clarity.

The TX-SR501E supports multiple audio formats, including Dolby Digital and DTS, making it a great choice for both home theater enthusiasts and music lovers. The receiver is equipped with a 5.1 channel configuration, allowing you to fully immerse yourself in surround sound, perfect for movie nights or gaming sessions. It also includes various sound modes, enabling customization based on your preferences.

In terms of connectivity, the Onkyo TX-SR501E does not disappoint. It features multiple HDMI inputs, allowing for easy connections with modern devices, such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it includes composite and component video inputs, so you can easily integrate older equipment into your setup. The receiver's outputs include a subwoofer pre-out, making it simple to connect an external subwoofer for enhanced bass response.

Another noteworthy characteristic is the inclusion of Onkyo’s own proprietary technologies, such as the Music Optimizer, which enhances the sound quality of compressed audio files. This feature works well with digital music formats, ensuring that your playlists sound as good as possible, regardless of the source.

The user interface of the TX-SR501E is intuitive, featuring an easy-to-navigate remote and an on-screen display that simplifies setup and operation. This makes it accessible for users of varying technical expertise.

Overall, the Onkyo TX-SR501E is a well-rounded home theater receiver that combines power, flexibility, and excellent sound quality, making it an ideal choice for anyone looking to elevate their audio experience. Whether you're a seasoned enthusiast or new to home theater systems, the TX-SR501E offers the performance and features you need to enjoy your favorite media to the fullest.