Onkyo TX-SR573 Recording the Input Source, Recording from Different Sources, Notes

Recording

This section explains how to record the selected input source to a component with recording capability, and how to record audio and video from different sources.

Recording the Input Source

You can only record to a component that is connected to the TAPE OUT or VIDEO 1 OUT jacks.

See pages 20–29 for information on connecting your AV components.

Recording from Different Sources

You can overdub audio onto your video recordings by recording from different audio and video sources. This is possible because only the audio source is changed when an audio-only input source, such as TAPE, TUNER, or CD is selected. The video source is unchanged. For example, if you select the VIDEO 3 input source, fol- lowed by the CD input source, you can watch video from the VIDEO 3 input and listen to audio from the CD input.

1

DVD	VIDEO 1	VIDEO 2
	VCR
VIDEO 3	TAPE	TUNER
CD

Remote

controller

V1 V2 V3

1 2 3

DVD

6

CD TAPE TUNER

7 8 9

Use the input selector buttons to select the component that you want to record.

Audio signals from the selected input source are output by the TAPE OUT and VIDEO 1 OUT jacks.

You can listen to the source while recording. The AV receiver’s VOL- UME control has no effect on record- ing.

In the following example, audio from the CD player con- nected to the CD IN jacks, and video from the camcorder connected to the VIDEO 3 INPUT VIDEO jack are recorded by the VCR connected to the VIDEO 1 OUT jacks.

VIDEO 3 INPUT

VIDEO L AUDIO R

Camcorder

video signal audio signal

2On your recorder, start record- ing.

3Start playback on the source component.

Notes:

•You cannot record from a component that’s connected to a digital input. Only analog inputs can be recorded.

•The surround sound effects provided by the listening modes cannot be recorded.

•You cannot record from an component that is con- nected to the multichannel DVD input.

•If you select another input source while recording, that input source will be recorded instead.

CD player VCR

1.Prepare the camcorder and CD player for playback.

2.Prepare the VCR for recording.

3.Press the [VIDEO 3] input selector but- ton.

4.Press the [CD] input selector button.

This selects the CD player as the audio source, but leaves the camcorder as the video source.

5.Start recording on the VCR, then start playback on the camcorder and CD player.

Video from the camcorder and audio from the CD player are recorded by the VCR.

50