Advanced Setup—Continued
Speaker Distance
To get the best from surround sound, it’s important that the sound from each speaker reaches the listener at the same time. To achieve this, you need to specify the dis- tance from each speaker to the listening position.
1Measure and make a note of the distance from each speaker to the listening position.
2Press the [RECEIVER] REMOTE
RECEIVER | MODE button, followed by the |
| [SETUP] button. |
3 | Use the Up and Down [ ]/[ ] |
| buttons to select “2. Sp Dis- |
Notes:
•The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Front distance. For example, if the Front distance is set to 20 ft. (6 m), the Center and Subwoofer distances can be set between 15 and 25 ft. (4.5 and 7.5 m).
•The Surround and Surround Back distances can be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the Front distance. For example, if the Front distance is set to 20 ft. (6 m), the SurrRight, Surr Left, Surr Back R, and Surr Back L distances can be set between 5 and 25 ft. (1.5 and 7.5 m).
Speaker Levels
You can set the volume level of each speaker so that all speakers can be heard equally at the listening position.
Speaker levels cannot be adjusted while the
ENTER
ENTER
tance,” and then press the [ENTER] button.
AV receiver is muted.
1Press the [RECEIVER] REMOTE
RECEIVER | MODE button, followed by the |
| [SETUP] button. |
4While “Unit” is displayed, use the
Left and Right [
]/[
] buttons to select “feet” or “meters”.
ENTER
feet: Distances can be set in feet. Range: 1 to 30 feet in
meters: Distances can be set in meters. Range: 0.3 to 9 meters in
5 |
| Use the Down [ | ] button to |
|
| select a speaker, and use the Left | |
| ENTER | and Right [ ]/[ | ] buttons to |
| specify the distance. | ||
|
| ||
2
ENTER
ENTER
Use the Up and Down [
]/[ ] buttons to select “3. Level Cal,” and then press the [ENTER] but- ton.
A pink noise test tone is output by the front left speaker.
6Repeat step 5 for all speakers.
Note:
Speakers that you set to No or None in the Speaker Configuration (page 32) cannot be selected.
7Press the [SETUP] button.
Setup closes.
3Turn up the volume so that you can hear the test tone suffi- ciently.
As each speaker outputs the test tone, its name appears on the display.
52
