Onkyo TX-SR600/600E Connections TX-SR700/700E, Pre Out, 12V TRIGGER ZONE 2 terminal

Connections (TX-SR700/700E)

9. Connecting video camera, etc. (VIDEO 4 INPUT)

Using an RCA video cable, connect the video output jack (composite) of the device to the VIDEO 4 VIDEO jack of the TX- SR700/700E. Or if the device has an S video output jack, connect it to the VIDEO 4 S VIDEO jack of the TX-SR700/700E using an S video cable.

Using an RCA audio cable, connect the audio output jack of the device to the VIDEO 4 AUDIO jacks of the TX-SR700/700E. Make sure that you properly connect the left channel to the L jack and the right channel to the R jack.

If the device has an optical digital output, connect it to the VIDEO 4 DIGITAL jack of the TX-SR700/700E.

PRE OUT

These jacks are for connecting an auxiliary power amplifier.

You can use an auxiliary power amplifiers to listen at louder volumes than you can with the TX-SR700/700E alone. When using a power amplifier, connect each speaker to the power amplifier.

					SURROU
	L	FRONT SURROUND	CENTER	ZONE 2	BACK
SUBWOOFER					SPEAKE
PRE OUT		L			L

RPRE OUT

The VIDEO 4 digital input is fixed to the OPTICAL input on the front panel.

S Video output

CD

R R

SURROUND

BACK

Digital output

(optical)

9. Video camera/Video game

(VIDEO 4 INPUT)

Video output

Left (white)

Subwoofer

R (red) Front

L (white)	R (red)	L (white)
	Surround	Surround back

Center

Analog output

Right (red)

12V TRIGGER ZONE 2 terminal

When the TX-SR700/700E is in the ZONE 2 mode, this terminal outputs at 12 V/100 mA.

Power amplifier

		1	2	3	4	5		6	7
1.	Subwoofer					5.	Surround left speaker
2.	Front right speaker					6.	Surround back speaker
3.	Front left speaker					7.	Center speaker
4.	Surround right speaker

21