Connecting speakers
Connecting speakers
After determining the layout of your speaker system, it is now necessary to connect the speakers correctly to your
Caution:
SPEAKER B
1. Strip away approx. 3/8 inch (10 mm) of the wire insulation.
3/8"
(10mm)
•Be sure to connect the positive (+) and negative
•Do not connect more than one speaker cable to one speaker terminal. Doing so may damage the
•When you listen to surround audio or select Multichannel, be sure to turn on SPEAKERS A.
•Connect only speakers with an impedance between 6 and 16 Ω to the
•Even if you are using only one speaker or listening to monaural (mono) sound, never connect a single speaker in parallel to both the right and
SPEAKERS |
| SPEAKERS | ||
– | + |
| – | + |
L | L | L |
| L |
|
|
| ||
R | R | R |
| R |
|
|
| ||
– | + |
| – | + |
•To prevent damage to circuitry, never
(+) and negative
2. Twist the wire ends tightly together.
3. Press the lever to open the terminal.
4. Insert the exposed wire end.
5. Release the lever to close the terminal. Leave some of the exposed wire showing outside the terminal.
Connecting a subwoofer
Use the SUBWOOFER PRE OUT jack to connect a subwoofer with a
NO!
Connecting the speaker cable
1. Strip away approx. 5/8 inch (15 mm) | 5/8" | |
(15mm) | ||
of the wire insulation. |
|
|
|
|
|
2. Twist the wire ends tightly together.
3. Unscrew the speaker terminal cap.
4. Insert the exposed wire end.
5. Screw down the speaker terminal cap.
Connecting to the SPEAKERS B terminals
If you require an additional set of front speakers (left and right), such as for use in another room, connect them to the FRONT SPEAKERS B inputs.
31
