Onkyo TX-SR600/600E Configuring the speakers, Buttons used for navigating through the menus

Models: TX-SR600/600E TX-SR700/700E

1 80
Download 80 pages 16.02 Kb
Page 39
Image 39
Buttons used for navigating through the menus

Configuring the speakers

(1)Remember the volume level of this noise and then press the Buttons on remote controller cursor button. The TX-SR700/700E/600/600E will now emit the pink noise from the center speaker.

(2)Using the Buttons on TX- and SR700/700E/600/600E cursor buttons, adjust the volume level of the noise from the center speaker so that it is at the same level as that that was emitted from the front left speaker.

(3)Press the Displaying the Main Menu and exiting the menu cursor button again. The TX-SR700/700E/600/600E will now emit the pink noise from the front right speaker.

Use the Manual background and Manual background cursor buttons to adjust the volume of the noise from the front left speaker so that it is the same level as that that was emitted from the center speaker.

(4)Use the Manual background cursor button to select other speakers and adjust the volumes until all speakers are adjusted to the same level.

The pink noise level can be adjusted to anywhere between –12 and +12 decibels for all speakers in 1-decibel increments.

Press the RETURN button to return to the main menu.

Press the MENU button on the front panel or SETUP button on the remote controller button to exit the Setup menu.

Using the remote controller

1. Press the TEST button.

You will hear a pink noise will be emitted from the front left speaker.

(1)Remember the volume level of this noise and then press the CH SEL button. The TX-SR700/700E/600/600E will now emit the pink noise from the center speaker.

(2)Using the LEVEL Manual background/Manual background buttons, adjust the volume level of the noise from the center speaker so that it is at the same level as that that was emitted from the front left speaker.

(3)Press the CH SEL button again. The TX-SR700/700E/600/600E will now emit the pink noise from the front right speaker.

Use the LEVEL Manual background/Manual background buttons to adjust the volume of the noise from the front left speaker so that it is the same level as that that was emitted from the center speaker.

(4)Use the CH SEL button to select other speakers and adjust the volumes until all speakers are adjusted to the same level.

The pink noise level can be adjusted to anywhere between –12 and +12 decibels for all speakers in 1-decibel increments.

2. Press the TEST button to complete the procedure.

Buttons used for navigating through the menus

You can change settings in the Setup Menu using the buttons on the front panel and on the remote controller.

The buttons on the remote controller correspond to those on the TX- SR700/700E/600/600E as shown below.

Buttons on remote controller

Buttons on TX-

SR700/700E/600/600E

 

Displaying the Main Menu and exiting the menu

SETUP

MENU

Selecting a menu or menu item

 

(upper edge of

UP

ENTER button)

 

(lower edge of

DOWN

ENTER button)

 

Setting the value

 

(left edge of

LEFT

ENTER button)

 

(right edge of

RIGHT

ENTER button)

 

Selecting the menu

 

ENTER

ENTER

Returning to the previous screen

 

RETURN

RETURN

39

Page 39
Image 39
Onkyo TX-SR600/600E Configuring the speakers, Buttons used for navigating through the menus, Buttons on remote controller