What if you make a mistake? | Opticon LMD 1135 specification

Manual No. 25-ULPNR102-01; Mar, 2005

LMD 1135 Laser Fixed Mount Scanner

When the scanner is in the Programming Mode, you can change more than one parameter at a time. However, this may become confusing. Until you become proficient at programming you may prefer to change only a few parameters at one time. We recommend that you keep a record of the changes you have made to the scanner.

What if you make a mistake?

Don’t worry. If you are programming the scanner but are unsure of which parameters have been changed, scan the Reset All Defaults bar code. This bar code returns the scanner to the default settings that were installed in the factory at the time the product was manufactured. Scanning this bar code erases any change you have made, including any changes that were made during previous programming.

Reset All Defaults U2 Command (U2)

This command will also return all settings to the defaults that were installed in the factory

Page 18

Image 22

Opticon LMD 1135 user manual What if you make a mistake?, Reset All Defaults U2 Command U2

Contents

Manual No -ULPNR102-01 March OSE Command Set User’s ManualPage Contents Scanner Servicing and Maintenance Technical SpecificationsConfiguring the Scanner Introduction and Getting Started Section Introduction and Getting Started Quick Start-Up ProcedureProduct Overview Page Physical Specifications Section Technical SpecificationsOptical Specifications Avoid specular reflection in the dead zone +/- 8 degrees Electrical Specifications JAN 13 R = 30 mm 1.2 or RS232 Signal Level RS232 Communications SpecificationsConnector Pin-outs RS232 Transmit / Receive Character Format Ordering Information Environmental SpecificationsPin No Signal Model Distance to the Bar Code Section Positioning the Scanner for Optimum PerformanceAchieving Optimum Performance Depth-of-Field Avoiding Specular Reflection Distance Max From Window Width Measuring Scanner Performance Quality Bar Code Labels Application Notes Tips for Achieving High Throughput Tips for Insuring Highest Data Integrity Tips for Verifying the Presence of a Bar Code Default Settings Section Configuring the ScannerProgramming Menus & Commands Parameter Factory Default Setting Common Causes of Poor Performance Section Application Engineering SupportTechnical Assistance and Support Modified and/or Customized Scanners Section Scanner Labeling Section Scanner Servicing and MaintenanceIEC 825-1 Class 1 Laser Device Appendices ESC Computer Command CR Appendix a Reset All Defaults U2 Command U2 What if you make a mistake? Options for UPC Global DefaultsSymbology Selection Options for EAN-8 & EAN-13 Options for Code Prefix/Suffix of Numeric Characters Select Symbology forPrefix/Suffix Prefix/Suffix of Alpha Characters Parallel Read Mode Setting the Trigger & Auto-TriggerSelecting the Read Mode Handshaking Mode Scanner Timeout Trigger EnabledXmit Error Trigger Enabled Mode only Quiet Zone Options Appendix C Computer Global Default & Scanner ConfigurationsCommand Description Including prefix/suffix Symbologies Symbology SelectionDescription Command Bar Code Only EAN 13/8 +2 Add/Activate Specific Bar Code Symbologies START/END Add/Activate Specific Bar Code Symbologies Delete/Deactivate Specific Bar Code SymbologiesDisable all symbologies Bar Code Command Description Options for UPC Options for EAN-8 & EAN-13 Options for Code 39 & IT Pharmaceutical IT Pharmaceutical, enable Transmit of leading a Options for Codabar NW-7 Codabar NW-7 Format Options for Interleaved & Industrial 2 5 Format Standard and Interleaved Meaning of Acronym Options for IataString format Number of digits 15 total Options for Code-128 / EAN-128 Options for Code-93 Disable fixed length all Fixing the Number of Digits Creating a Prefix and/or Suffix Setting Prefixes Identifying the Symbology UPC-E +2 or +5 MSI/Plessey Setting Suffixes Identifying the Symbology Bar Code Command Description Direct Input of Numeric Characters Direct Input of Alpha Characters Direct Input of Alpha Characters Lower Case ETB Direct Input of Control Characters SUB Direct Input Characters Misc Bar Code Command Description Code Identification & Characters/Digits Transmitted START/END Communication Parameters Communication Parameters Handshaking Terminal Ms intercharacter delay Disable buzzer Buzzer Operation Setting the Trigger & Auto-Trigger Functions Positive & Negative Bar Codes Selecting the Read Mode Trigger Function Enabled S8 Trigger Function Disabled S7 Add-on Wait Mode Applies to UPC/EAN only Parallel Read ModeParallel labels only Scanner Timeout Trigger Enabled Mode only Multiple Read Reset Time Quiet Zone Options Redundant Decoding Transmitting Error Indications Trigger Enabled only Error Messages No decode / no label Good Read LED Operation Appendix D Appendix E