Opticon LMD 1135 Positive & Negative Bar Codes, Setting the Trigger & Auto-Trigger Functions

Manual No. 25-ULPNR102-01; Mar, 2005 LMD 1135 Laser Fixed Mount Scanner

26. Positive & Negative Bar Codes

	Computer	Function	Bar Code
	Command	/Description	Command
	(ZZ)	START/END	[[ ￿
		Programming Menu
	V2	Positive bar code only	W3 ￿
		(black bars/white spaces)
	V3	Negative bar codes	W! ￿
	V4	Both positive & negative bar	W5 ￿
		code
27. Setting the Trigger & Auto-Trigger Functions
	Computer	Function	Bar Code
	Command	/Description	Command
	(ZZ)	START/END	[[ ￿
		Programming Menu
	S7	Disable the trigger function	T8 ￿
		/ laser is ON continuously
	S8	Enable the trigger function /laser	T9 ￿
		is OFF until trigger is activated or
		“pulled”
	+F	Disable Auto-trigger	,G ￿
	+I	Enable Auto-trigger	,J ￿
	Z	Activate the trigger; turns on the	Use as
		laser	Computer Command

￿

%￿

￿

￿

￿

%￿

%

The Trigger function is enabled in the default setting. This means that the laser is “OFF” until triggered by command or via the Auto-Trigger which is also enabled in the default setting. For some applications, you may wish the laser to operate continuously, although this is not recommended. This can be done by disabling the Trigger function using the S7 command. Once in the “Trigger Disabled” mode, the laser is on continuously.

The software trigger is actuated by downloading and <ESC> Z <CR> computer command from the host. (See Scanner Timeout to establish the length of time the scanning light remains ON after the trigger is activated.) A hardware trigger is not available with this scanner.

Page 58