Interface Specifications, Signal Level

Opticon

OPR 2001

Specifications Manual

8.Interface Specifications

8.1.RS-232C Interface

8.1.1.Settings and Communication

Reading menu barcodes [ZZ] + [U2] + [ZZ] can set the RS-232C interface default.

Item	[U2] setting

Baud rate	9600 BPS

Start/stop bits	1 bit

Data bits	8 bits

Parity bits	No parity

Handshaking	No handshake

Flow control time out	Indefinitely

You can change the communication condition using the menu barcode.

8.1.2.Signal Level

Signal Name	I/O	RS-232C Level (V)

		Mark/OFF	Space/ON

TxD	OUT	-5 to -15	+5 to +15

RxD	IN	-3 to -15	+3 to +15

RTS	OUT	-5 to -15	+5 to +15

CTS	IN	-3 to -15	+3 to +15

Page 18

Image 18

Opticon OPR 2001 Interface Specifications, RS-232C Interface Settings and Communication, Signal Level, U2 setting

Contents

OPR Document History Limited Warranty and DisclaimersWarranty Copyright 2007 Opticon. All rights reserved Contents Cable and Connector Table of Figures Serial number diagram Abstract Overview Physical Features Environmental Specifications Ambient Light Immunity Conditions RS-232C Electrical SpecificationsParameter Symbol Min Typ Max Unit USB, Wedge Parameter Specification Optical SpecificationsLaser Scanning Specifications Laser Scanning Standard Laser Scanning Tilt Technical Specifications Print Contrast Signal PCS Quiet Zone Scan Area and ResolutionResolution Symbology Digits Depth of Field mm Pitch, Skew, and Tilt Pitch Angle Pitch Skew Angle and Dead Zone Skew angle and dead zone Tilt Angle Pitch, Skew Angle, Dead Zone Curvature Curvature Signal Level Interface SpecificationsRS-232C Interface Settings and Communication U2 setting Signal Pin Pin AssignmentInterface Circuit Communication Format Handshaking Menu/CommandCharacter Format Handshaking Flow Control Time Out Menu/Command BUSY/READY CTS, TXD signal timing Modem ACK/NAK Timeout Menu/Command ACK/NAK ACK/NAK no Response ACK/NAK-No response USB a connector USB Interface Specifications SettingsConnectors USB-HID DOS/V Wedge Interface Specification Settings Desktop PC When using external keyboard DOS/V Host Connector DOS/V Keyboard ConnectorContact Number Signal Name Cable and Connector RS-232C CableUSB Cable Pin No RS-232C Connector Specification Scanner SideWedge Cable Wedge USB-HID Default Default SettingsRS-232C Default Wedge Default with external keyboard Symbology Read Transmit Default Settings 1 Readable CodesWedge Default without external keyboard Set Others Code Symbology Read Transmit Calculate Set Others Code Default Settings 2 Read Options, Trigger, Buzzer Default Setting Collective Packaging Specification Packaging SpecificationsIndividual Packaging Specification Serial Number Shock Drop Test without packaging DurabilityElectrical Noise Drop Test with individual packaging Dust and Drip Proof Vibration StrengthStatic Electricity Cable Strength Cable Pulling Test Reliability Auto Trigger Option Auto Trigger Settings Stand Only Trigger options Always Manually Regulatory Compliance Laser SafetyProduct Safety EMC Shock SafetyTemperature Conditions Foreign Materials Mechanical Drawing Mechanical drawing

8.Interface Specifications

8.1.RS-232C Interface

8.1.1.Settings and Communication

[U2] setting

8.1.2.Signal Level

Signal Name

RS-232C Level (V)