Busy/Ready, Flow Control Time Out Menu/Command | Opticon OPR 2001

Opticon

OPR 2001

Specifications Manual

b)BUSY/READY

The scanner and the host computer notify each other of their state and whether they can receive data with BUSY/READY through an RTS line. They can communicate state to each other through a CTS line when connected as in the following figure.

Figure 12: Busy/Ready communication

The scanner stays ON (is able to receive data) except during certain parts of the process, such as receiving data (buzzer command execution), transmitting data, and menu processing. The scanner checks the CTS line before transmitting data. When it is ON, the scanner transmits data. When it is OFF, the scanner waits for it to turn ON within a set time. The scanner will abort transmission with an error indication (buzzer) when the CTS line is not ON within a specified period. The Flow Control time-outs are as follows, and the default setting is “indefinitely“ (I0).

Flow Control Time Out	Menu/Command

Indefinitely	I0

100 ms	I1

200 ms	I2

400 ms	I3

Figure 13: Cannot receive command

21

Image 21

Opticon OPR 2001 specifications Busy/Ready, Flow Control Time Out Menu/Command

Contents

OPR Warranty Limited Warranty and DisclaimersDocument History Copyright 2007 Opticon. All rights reserved Contents Cable and Connector Table of Figures Serial number diagram Overview Abstract Environmental Specifications Physical Features Conditions Ambient Light Immunity Parameter Symbol Min Typ Max Unit Electrical SpecificationsRS-232C USB, Wedge Laser Scanning Specifications Optical SpecificationsParameter Specification Laser Scanning Standard Laser Scanning Tilt Print Contrast Signal PCS Technical Specifications Resolution Symbology Scan Area and ResolutionQuiet Zone Digits Depth of Field mm Pitch Pitch, Skew, and Tilt Pitch Angle Skew angle and dead zone Skew Angle and Dead Zone Pitch, Skew Angle, Dead Zone Tilt Angle Curvature Curvature RS-232C Interface Settings and Communication Interface SpecificationsSignal Level U2 setting Signal Pin Pin AssignmentInterface Circuit Character Format Handshaking Menu/CommandCommunication Format Handshaking BUSY/READY Flow Control Time Out Menu/Command Modem CTS, TXD signal timing ACK/NAK ACK/NAK Timeout Menu/Command ACK/NAK-No response ACK/NAK no Response Connectors USB Interface Specifications SettingsUSB a connector USB-HID Desktop PC When using external keyboard DOS/V Wedge Interface Specification Settings DOS/V Host Connector DOS/V Keyboard ConnectorContact Number Signal Name Cable and Connector RS-232C CableUSB Cable Wedge Cable Connector Specification Scanner SidePin No RS-232C Wedge RS-232C Default Default SettingsUSB-HID Default Wedge Default with external keyboard Wedge Default without external keyboard Default Settings 1 Readable CodesSymbology Read Transmit Set Others Code Symbology Read Transmit Calculate Set Others Code Default Setting Default Settings 2 Read Options, Trigger, Buzzer Individual Packaging Specification Packaging SpecificationsCollective Packaging Specification Serial Number Electrical Noise DurabilityShock Drop Test without packaging Drop Test with individual packaging Static Electricity Vibration StrengthDust and Drip Proof Cable Strength Cable Pulling Test Auto Trigger Option Reliability Trigger options Auto Trigger Settings Stand Only Manually Always Product Safety Laser SafetyRegulatory Compliance EMC Temperature Conditions SafetyShock Foreign Materials Mechanical drawing Mechanical Drawing