Optima Company 600 - 1700 Component parts of the heat pump

9

Component parts of the heat pump

IVT Optima 1400-1700

When the heat pump is combined with electric cassette or existing electric

/oil-ﬁ red boiler, a control cabinet is included. This is located indoors, normally

in the same room as the electric cassette or electric/oil-ﬁ red boiler. The control

unit is included in the control cabinet. The electric cassette or optional unit for

electric/oil-ﬁ red boiler is also included and located indoors. Hot water heater

is available as an accessory. This must be equipped with electric element if

electric/oil-ﬁ red boiler is used.

A power guard is available as accessory when electric cassette is used.

Component parts of the heat pump

Optima 1400-1700

Power guard, option

Rego 800 control cabinet

Rego 800 option for

Electric/oil-ﬁ red boiler

Coil tank 302/502 with or

without electric element,

accessory

Electric cassette, option

Operating mode 1400 Control

cabinet

Electric

cassette

Electric/oil-

ﬁ red boiler

Power

guard

302 302 with electric

element

Optima with mixed additional heat •• • •

Optima with electric cassette •• • •• •

Operating mode 1700 Control

cabinet

Electric

cassette

Electric/oil-

ﬁ red boiler

Power

guard

502 502 with electric

element

Optima with mixed additional heat •• • •

Optima with electric cassette •• • •• •

Contents

Main Page Thank you for choosing a heating installation from IVT Industrier AB Innehll Important information For the user Note How a heat pump works The heat pump collects heat from the outdoor air Technology in and around the heat pump Page Component parts of the heat pump IVT Optima 600-1100 9 Component parts of the heat pump IVT Optima 1400-1700 Power guard, option Component parts of the heat pump Optima 1400-1700 Control unit Rego 800 Automatic defrosting The control units operating modes Heat pump with electric cassette Heat pump with mixed additional heat, e.g. an existing electric/oil- red boiler. Heat pump with electric boiler 290 A/W The control units control method for heating Control with an outdoor sensor Control with an outdoor sensor and a room sensor Control panel Status lamp Menu dial Power switch (ON/OFF) Menu display How to use the control panel Symbol overview Menu Menu levels Set the heating Setting the heating, room sensor not installed: Setting the heating, room sensor installed: Extra hot water Temperatures Advanced menu Overview Set the heating Heat curve Set the heat curve Hysteresis Set the desired room temperature Time limited settings Time control Holiday Heating season Heating, maximum operating time at hot water requirement Hot water settings Extra hot water Hot water peak Time control hot water Timers Setting the clock Alarm log Access level Return to factory settings Deactivate alarm buzzer Program version Maintenance Unscrew the protective covers Remove dirt and leaves Protective covers Warning Evaporator Snow and ice Warning Particle lter What to do if a fault occurs Dimmed menu display Emergency operation Example of an alarm: All alarms and warning windows List of all alarms: List of all warning windows: Alarm window Tripped low pressure switch Tripped high pressure switch Sensor failure / short circuit Faulty function in 4-way valve T6 High hot gas temperature Fault on electric additional heat Fault on additional heat for heating system (electric/oil- red boiler) T8 High ow temperature Low temperature in condenser Tripped motor cut-out compressor Tripped motor cut-out fan (Optima1000/1300) Warning windows High temperature difference heat transfer uid The heat pump is now working at its highest permitted temperature Additional heat is now working at its highest permitted temperature Technical information Factory settings Menu Advanced menu Technical information Sound levels Sensor table The table shows all sensor resistance at different temperatures. Temperature (C) k