Southbend SB1042PF owner manual Thread Dial Chart, TPI Divisible By

For Machines Mfg. Since 3/11 O P E R A T I O N Turn-Nado®EVS Lathes

Thread Dial

The numbers on the thread dial are used with the thread dial chart to show when to engage the half nut during inch threading. The thread dial gear must be engaged with the leadscrew for this to work. Loosen the knurled knob on the thread dial, pivot the dial gear toward the leadscrew

so that it properly meshes with the leadscrew threads, then re-tighten the knob, as shown Figure 81.

Leadscrew

Dial Gear

Knurled

Knob

Figure 81. Thread dial engaged with the leadscrew.

Thread Dial Chart

Find the TPI (threads per inch) that you want to cut in the left column of the thread dial chart (see Figure 82), then reference the dial number to the right of it. The dial numbers indicate when to engage the half nut for a specific thread pitch. The thread dial chart can also be found on the front of the thread dial housing.

In.
2	3
1	4

4,8,12,16,20,24,	Any Position
28,32,36,40,44,
48,56,60,72
2,6,10,14,	Non-
18,22,26,	Numbered
30,54	Position
3,5,7,9,	Numbered
11,13,15,	Position
19,23,27	1,2,3,4
2½,3½,4½,	Position
7½,11½,13½	1,3 or 2,4
2¼,2¾,	Position
3¼,3¾	1 Only
27⁄8	Same as
	Metric
	Threads

Figure 82. Thread dial chart.

When threading, we recommend using the slowest speed possible and avoiding deep cuts, so you can more easily disengage the half nut to prevent an apron crash!

Note: The thread dial is not used for metric threading, or diametral and modular pitches. With these, you must leave the half nut engaged until the turning is complete.

The following examples explain how to use the thread dial chart for inch threads.

TPI Divisible By 4

For threading a TPI that is divisible by four, use any line on the thread dial (see Figure 83).

TPI

4,8,12,16,20,24, Any Position 28,32,36,40,44, 48,56,60,72

Figure 83. Any position on the dial for threading TPI

divisible by 4.

-61-