For Machines Mfg. Since 3/11

O P E R A T I O N

Turn-Nado®EVS Lathes

4.Loosen the pivot arm hex nut shown in Figure 77, then swing the pivot arm to the left so that the 44T/56T gears are away from the 57T gear. Hand tighten the hex nut to keep the arm in place.

As you remove and replace end gears, use a stiff brush and mineral spirits to clean away the debris and grime from them, then re-lubricate them as instructed in End Gears on Page 74.

5.Making sure to keep the shaft key firmly seated, remove the spacer and the 57T gear, then re-install them as follows:

—For the standard end gear configuration, slide the 57T gear on first, then the spacer on the outside.

—For the alternate end gear configuration, slide the spacer on first, then the gear.

6.Re-install the cap screw, lock washer, and flat washer you removed in Step 3 to secure the spacer and 57T gear. Do not overtighten.

7.Slide the pivot arm back so that either the 44T or the 56T meshes with the 57T gear, then retighten the pivot arm hex nut.

Note: Make sure to keep approximately 0.002" play between the gears.

8.Replace and secure the end gear cover before re-connecting the lathe to power.

Threading Controls

The following subsections describe how to use the threading controls and charts on this lathe. If you are unfamiliar with the process of cutting threads on a lathe, we strongly recommend that you read books, review industry trade magazines, or get formal training before doing any threading projects.

Headstock & Gearbox Threading Controls

The threading charts on the headstock face display the settings for metric and inch threading, and modular and diametral pitches.

For inch or metric threads, use the standard end gear configuration. For modular or diametral pitches, use the alternate configuration

Use the controls on the lathe and follow along with the example below to better understand how to set up the lathe for the desired threading operation.

Example: Metric Thread Pitch of 2.5mm

1.Make sure the end gears are in the standard configuration, which is used for all metric threading (refer to End Gears on Page 58 for detailed instructions).

2.Locate the line in the metric thread chart that lists the setting for 2.5mm threads, as illustrated in Figure 78.

Metric Thread

Width of 2.5mm

Figure 78. Metric thread chart.

-59-

Page 60 Page 62
Page 61
Image 61
Southbend SB1042PF owner manual Headstock & Gearbox Threading Controls, Example Metric Thread Pitch of 2.5mm
Page 60 Page 62

SB1042PF specifications

The Southbend SB1042PF is a high-performance commercial range designed specifically for culinary professionals who demand reliability, efficiency, and versatility in their kitchen equipment. This powerful range is engineered to provide outstanding cooking performance while featuring the robust build quality necessary for demanding food service environments.

One of the main features of the SB1042PF is its dual-fuel capability, combining the efficiency of gas burners with the precision of electric ovens. This hybrid approach allows chefs to enjoy the benefits of both cooking methods, such as rapid heating and responsive temperature control. The range typically comes equipped with four heavy-duty cast iron burners, each delivering 30,000 BTUs of cooking power. This ensures that specific dishes can be prepared quickly and efficiently, making this range suitable for high-volume kitchen operations.

In addition to the powerful burners, the SB1042PF features a convection oven that ensures even heat distribution. With a capacity of 26 inches, this oven is perfect for baking, roasting, and delivering consistent cooking results. The oven also includes a two-speed fan that enhances airflow, ensuring that dishes cook uniformly throughout.

The construction of the Southbend SB1042PF reflects its intention for heavy use. The stainless steel exterior not only adds a sleek look to any kitchen but also makes cleaning and maintenance a breeze. The durable cast iron burners are built for longevity, providing chefs with peace of mind even under intense kitchen conditions.

Innovative safety features are also incorporated into the SB1042PF. This range includes flame failure protection, which automatically shuts off the gas supply in case of an extinguished flame, ensuring that kitchens remain safe environments. Additionally, the oven has a temperature control system designed to allow precise adjustments, ensuring that cooking temperatures can match the chef's specifications.

Finally, the Southbend SB1042PF is designed with user comfort and convenience in mind. It features ergonomic controls, easy-to-read indicator lights, and a removable crumb tray for hassle-free cleaning. The range stands as a testament to Southbend's commitment to quality, performance, and innovation, making it an essential piece of equipment for any serious kitchen.
Top Page Image Contents