If the CD player is jolted during play, the rotation speed might suddenly change or the CD player might make an unusual noise. This is not a malfunction.
PLAYING A CD
1.Press ON/OFF to turn on the stereo.
2.Insert a compact disc (label side up) in the slot. The stereo displays CD, DISC IN, and TR:01 and the CD starts to play from track 1.
If a CD is already in the CD player, simply press CD to play the CD. The stereo displays CD, DISC IN, TR:, and the track number of the track you last played, and the CD starts to play from the point where you last stopped it.
After the stereo plays the entire CD, it automatically repeats all tracks, starting with Track 1.
Note:
If a CD is loaded when you turn off your vehicle's ignition or the CD player, you must wait about 5 seconds after you turn the ignition or CD player back on before you can press CD to play a CD.
3.Press AUDIO CONTROL + or - to increase or decrease the volume as desired.
Note:
See "Adjusting the Controls" on Page 16 for information about changing the stereo's other settings.
4.To pause playback, press CD. The stereo displays PAU, DISC IN, TR:, and the track number. To resume play, press CD again.
Note:
If you pause a CD for more than 5 minutes, the clock display appears.
5.To remove a CD from the CD player, press Up Arrow. (new illus)
