INSTALLATION
BEFORE YOU BEGIN THE INSTALLATION
Before you install your stereo, read all the instructions in this owner’s manual. You should be able to an- swer all of these questions about your vehicle’s electrical and sound systems:
•Which terminal in my vehicle’s fuse box supplies power even when the ignition is turned off?
•Which terminal in my vehicle’s fuse box is for accessories?
•How do I connect a wire to the fuse box?
Also, be aware that installation in your vehicle might require cutting or modifying your vehicle.
Place the stereo as close as possible to the selected mounting location. We recommend that you install the stereo by temporarily connecting it to ground and power, optional compo- nents, and your speakers. Then test the connections, disconnect the ste- reo, mount it in your vehicle, and re- connect it. The instructions in this manual are arranged in this order.
Preparing the Mounting Area
Before you mount the stereo, make sure you have all the necessary ma- terials. Then confirm that the stereo
fits your vehicle’s mounting area. This autosound stereo system is a
Note: If the mounting area is too large, you might be able to mount the stereo with an
Caution: Be sure to avoid obstruc- tions behind the mounting surface.
Routing Speaker Wires
If you install speakers, avoid routing the speaker wires near moving parts or sharp edges. You can usually route them along the wiring channel beneath the vehicle’s door facings by carefully removing the molding that holds the carpet in place. After you route the speaker wires, replace the molding.
MAKING THE
CONNECTIONS
The supplied harness with the
5
