Remote Office Configuration of the IP Phone (Phone-Side)
Reinstalling Aastra IP Phones at the Central Site
Reinstalling Aastra IP Phones at the Central Site
Use the procedure described in this section to reinstall an IP phone at the central site that had been previously installed at a remote office.
The procedure described below resets the IP phone from “remote mode” to back to “local mode.” If you do not reset the IP phone, it will attempt to boot in remote mode when you install it.
Step Action
1 | Connect the Aastra IP phone to your Ethernet Hub/Router. |
Note: See your AastraLink Pro 160 Quick Start User’s Guide for instructions on setting up and installing your Aastra IP phone.
2Select <Cancel> when the IP phone UI prompts you to specify the IP address of the AastraLink at your central site.
|
|
| Enter server name/IP |
| ||
|
|
| 65.215.35.80 |
|
|
|
|
| Backspace | Select Cancel | |||
|
|
| ||||
|
| Dot . | Cancel |
|
|
|
|
|
|
|
| ||
|
| abc | Done |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
3Press the <Options> key or button on your IP phone.
4Use the arrow keys to view the options, then select <Factory Default>
5Press <Show>
6Enter the administrator password, then press <Enter>
7Select <Default> when prompted to “Reset Phone Back to Factory Defaults.”
