AastraLink Pro 160 Administrator Guide
Configuring System Settings
Specifying the Date and Time
If automatic time and date were enabled during the initial administrator setup of the system (default set to yes during initial setup), the AastraLink Pro 160 uses the Network Time Protocol (NTP) to synchronize its date and time from the Internet global time servers. If Internet access is not available, then use the following procedure to manually set the date and time for your AastraLink Pro 160.
AastraLink Web UI
Step Action
1Select Configuration->System->Set Date/Time.
2
3
4
In the “Date” field, specify the date that the AastraLink Pro displays on the IP phones in your network. Default is 7 May 2008.
In the “Time” field, specify the time that the AastraLink Pro displays on the IP phones in your network. Default is the current time set on the AastraLink Pro 160.
Click <Save> to save your changes.
