Aastra Telecom Pro 160 manual Remote Office Configuration of the IP Phone Phone-Side

Remote Office Configuration of the IP Phone (Phone-Side)

Preparing To Deploy Remote User Phones

Registering the IP phones by connecting them at the central site is the quickest and easiest method to register the lines with AastraLink Pro and ensure that the IP phone is pre-configured with the public IP address and port previously configured on the AastraLink. Using the <Add Phone> feature permits the IP phone to be registered, but does not pre-configure the public address information; therefore, it would be necessary for the end-user to add this at install time.

Once the administrator has completed the steps described above, then users can follow the instructions described in “Connecting To The IP Phone Network From a Remote Office” on page A-7to install their Aastra IP phones at a remote site, and connect to the AastraLink IP phone network.

41-001190-01 Rel. 1.1, Rev. 00 A-3