Aastra Telecom Pro 160 manual Editing Local Network Settings

AastraLink Pro 160 Administrator Guide

Configuring Network Settings

Editing Local Network Settings

The Local Network parameters you can specify for the AastraLink Pro 160 include:

•Host Name

Name currently assigned to your AastraLink Pro 160 device. You can rename the device during initial installation and setup. Otherwise, the AastraLink Pro 160 retains the default host name of “aastralink.”

If you add multiple AastraLink Pro 160 devices to your network, they are by default named “aastralink-1, aastralink-2” etc. You should specify a unique host name for your AastraLink Pro 160 in order to make the device easily identifiable on your network.

The hostname can be up to 10 characters maximum, no spaces or special characters allowed. For example:

—Aastra_1 is a valid hostname

—Aastra 1 is not valid (spaces are not allowed)

Note: If you change the hostname of your AastraLink Pro 160 device, then you have to reboot the IP phones in order to connect to the new hostname on your network.

•Domain

Domain name assigned to your AastraLink Pro 160.

•LAN MAC Address

MAC address assigned to your AastraLink Pro 160.

•Use DHCP

Enables or disables Dynamic Host Configuration Protocol (DHCP), in order to support dynamic/static addressing. DHCP is enabled on the AastraLink Pro 160 by default.

•IP Address

IP Address assigned to your AastraLink Pro 160.

•Subnet Mask

Subnet Mask assigned to your AastraLink Pro 160.

4-16 41-001190-01 Rel. 1.1, Rev. 00