Aastra Telecom Pro 160 manual Install the Remote IP Phone Pre-Stage Phone

AastraLink Pro 160 Administrator Guide

Remote Office Configuration of the AastraLink Pro 160

AastraLink Pro 160 Remote Office Configuration

Step Action

Install the Remote IP Phone (Pre-Stage Phone)

7Press <Remote> when remote phone is in the Auto-Discovery screen.

If the phone cannot find a UPnP enabled device, it displays “UPnP device not found”. Press <Skip>. The phone prompts for the NAT IP address.

8Enter the Home Router WAN-side IP address. For example: 65.96.171.130 The phone prompts for the SIP port.

9Enter the SIP port for the Home Router. For example, you can enter 51620. The Phone prompts for an RTP port.

10Enter the RTP port for the Home Router. For example, you can enter 51720. The Phone prompts for an HTTPS port.

11Enter the HTTPS port for Home Router. For example, you can enter 51510.

Install the Remote IP Phone (Non-pre-Stage Phone)

12Press <Remote> and enter the server external gateway IP address (for example, 65.215.35.80). The Phone prompts for an HTTP port.

13Enter the HTTP port start (for example, 51510). The Phone prompts for a NAT IP address.

14Enter the Home Router WAN-side IP address. The phone prompts for the SIP port.

15Enter the SIP port for the Home Router. For example, you can enter 51620. The Phone prompts for an RTP port.

B-10 41-001190-01 Rel. 1.1, Rev. 00