5 – Managing Ports

￿

Configuring Ports

5.1.4

Name Server Data Window

The Name Server data window displays information about the port and the connected device. To open the Name Server data window, select one or more switches in the topology display and choose the Name Server tab below the data window. You can also open the Name Server data window in the faceplate display. Refer to Table 4-1for a description of the Name Server data window entries.

5.2

Configuring Ports

The port settings or characteristics are configured using the Port Properties window shown in Figure 5-2. To open the Port Properties window, select one or more ports, open the Port menu and select Port Properties.

Figure 5-2. Port Properties Window

The Port Properties window displays the switch name and the selected port(s). Use the Port Properties window to change the following parameters:

Port state

Port speed

Port mode

TL mode

Port buffer credits

I/O Stream Guard (RSCN Suppression)

5-8

59022-03 D

Page 84
Image 84
Q-Logic 59022-03 D manual Configuring Ports, Port Properties Window