Q-Logic 59022-03 D manual Use Arbff instead of idles on loop

￿			A – Command Line Interface
			Set Config Command
	Table A-6. Set Config Port Parameters (Continued)
	Parameter		Description
	ISLSecurity	E_Port security. Determines which
		switches a port will establish a link with.
		■ ANY - we will link with any switch.
		■ Ours - we will only link to another
		SANbox2 switch.
		■ None - the port will not establish an
		ISL link.
	SymbolicPortName	Descriptive name
	ALFairness	Default is switch that has priority
	ARB_FF	Use ARB_FF instead of idles on loop
		FCAL option
	InteropCredit	Number of buffer-to-buffer credits per
		port. 0 means the default (12) is
		unchanged.
	ExtCredit	Extended credit port
	FANEnable	Fabric Address Notification. If enabled,
		notifies logged-in NL_Ports of the
		FL_Ports’s address, port name, and
		node name.
	LCFEnable	Link control frame preference, R_CTL =
		0xC
	MFSEnable	Multi-Frame Sequence bundling
	MFS_TOV	MFS limit for camp on
	MSEnable	Management Server enable on this port
	NoClose	Don't close unless another devices
		arbitrates
	I/O Stream Guard	Enables or disables the suppression of
		RSCN messages
	VIEnable	Enable VI preference routing
	CheckAlps	Close before sending frames to new
		target

59022-03 D A-25