A – Command Line Interface | |||||
Zoneset Command |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| list |
|
|
|
|
| Displays a list of all zone sets. This keyword is available with User authority and | ||||
| does not require a Zoning Edit session. |
|
| ||
| remove [zone_set] [zone_list] |
|
| ||
| Removes one or more zones given by [zone_list] from the zone set given by | ||||
| [zone_set]. If [zone_set] is the active zone set, the zone will not removed until the | ||||
| zone set has been deactivated. [zone_list] can be an alias. This keyword requires | ||||
| a Zoning Edit session. |
|
| ||
| rename [zone_set_old] [zone_set_new] |
|
| ||
| Renames the zone set given by [zone_set_old] to the name given by |
|
| ||
| [zone_set_new]. You can rename the active zone set. This keyword requires a | ||||
| Zoning Edit session. |
|
| ||
| zones [zone_set] |
|
| ||
| Displays all zones that are members of the zone set given by [zone_set]. This | ||||
| keyword is available with User authority and does not need a Zoning Edit session. | ||||
Notes | ■ | A zone set must be active for its definitions to be applied to the fabric. | |||
| ■ | Only one zone set can be active at one time. |
|
| |
| ■ | A zone can be a member of more than one zone set. |
|
| |
Examples | The following is an example of the Zoneset Active command: |
|
| ||
| SANbox2 $> zoneset active |
|
| ||
The active ZoneSet is: Beta
The following is an example of the Zoneset List command:
SANbox2 $> zoneset list
Current List of ZoneSets
alpha beta
The following is an example of the Zoneset Zones command:
SANbox2 $> zoneset zones ssss
Current List of Zones for ZoneSet: ssss
zone1
zone2
zone3
