
A – Command Line Interface | |
Set Setup Command | |
|
|
|
|
The following is an example of the Set Setup System command:
SANbox2 | $> admin start |
|
|
SANbox2 | (admin) #> set | setup system |
|
A list of attributes | with formatting and current values will follow. | ||
Enter | a new value or | simply press | the ENTER key to accept the default value. |
If you wish to terminate this process before reaching | the end of the list | |||
press ’q’ or ’Q’ and the ENTER | key to do so. |
|
| |
NetworkIPAddress | IP Address) | [172.22.10.170] | ||
NetworkIPMask | IP Address) | [255.255.252.0] | ||
GatewayIPAddress | IP Address) | [172.22.8.254 | ] | |
NetworkDiscovery | (1=Static, 2=Bootp, 3=Dhcp, 4=Rarp) | [Dhcp | ] | |
AdminTimeout | (dec value | [30 | ] | |
SecurityEnable | (True / False) | [False | ] | |
RemoteLogEnable | (True / False) | [False | ] | |
LogHost IP Address (True / False) | [False | ] |