| A – Command Line Interface | |
| Help Command | |
|
| |
|
| |
Help Command | ||
| Displays a brief description of the specified command and its keywords. | |
Authority | User | |
Syntax | help [command] [keyword] | |
Keywords | [command] | |
| A command name. If you omit this value, the system displays all available | |
| commands from which to choose. | |
| [keyword] | |
| A keyword associated with the command named by [command]. If you omit this | |
| value, the system displays the available keywords for the specified command. | |
| all | |
| Displays a list of all available commands (including command variations). | |
Examples | The following is an example of the Help Set command: | |
| SANbox2 $> help set | |
set SET_OPTIONS
There are many attributes that can be set.
Type help with one of the following to get more information:
set beacon
set config port set config ports set config switch set log
set port
set setup snmp set setup system set switch
The following is an example of the Help Set Beacon command:
SANbox2 $> help set beacon set beacon On Off
This command allows the lights on the front of the switch to flash.
The On option will start and the Off option will stop the flashing.
