Q-Logic 59022-03 D manual Active Zone Set Data Window

3 – Managing Fabrics	￿
Displaying Fabric Information

3.3.2

Active Zone Set Data Window

The Active Zoneset data window displays the zone membership for the active zone set. To open the Active Zoneset data window, choose the Active Zoneset tab below the data window in the topology display. Refer to ”Configured Zonesets Data Window” on page 4-6for information about the zone set definitions on a particular switch. Refer to ”Zoning a Fabric” on page 3-9for more information about zone sets and zones.

The Active Zoneset data window, shown in Figure 3-2, uses display conventions for expanding and contracting entries that are similar to the fabric tree. An entry handle located to the left of an entry in the tree indicates that the entry can be expanded. Click this handle or double-click the following entries to expand or contract them:

■A zone set entry expands to show its member zones.

■A zone entry expands to show its member ports.

■A port entry expands to show the port Fibre Channel address.

■A Fibre Channel address entry expands to show the port worldwide name.

Active Zoneset

Data Window

Figure 3-2. Active Zone Set Data Window

3-8 59022-03 D