A – Command Line Interface | |
Set Beacon Command | |
|
|
|
|
Set Beacon Command
Assists in locating a switch by causing all port
Authority | User |
Syntax | set beacon [state] |
Keywords | [state] |
| Enables or disables the flashing of the port |
| On |
| Enables the flashing beacon. |
| Off |
| Disables the flashing beacon. |
Examples | The following examples enables and disables the beacon: |
| SANbox2 $> set beacon on |
| Command succeeded. |
| SANbox2 $> set beacon off |
| Command succeeded. |