2 – Using SANbox Manager

￿

Using the Faceplate Display

2.10.3

Topology Data Windows

The topology display provides the following data windows corresponding to the data window tabs:

Name Server - displays all devices logged with the name server and their location within the current fabric configuration. Refer to ”Name Server Data Window” on page 4-3for more information.

Active Zoneset - displays the active zone set for the fabric including zones and their member ports. Refer to ”Active Zone Set Data Window” on page 3-8for more information about this data window. Refer to ”Zoning a Fabric” on page 3-9for information about zone sets and zones.

Switch - displays current network and switch configuration data for the selected switches. Refer to ”Switch Data Window” on page 4-4for more information.

2.11

Using the Faceplate Display

The faceplate display shown in Figure 2-11displays the switch name and operational state, and port status. Consider the following functional elements of the faceplate display:

Port views and status

Working with ports

Faceplate data windows

Figure 2-11. Faceplate Display

2-18

59022-03 D

Page 30
Image 30
Q-Logic 59022-03 D manual Topology Data Windows, Using the Faceplate Display