￿

A – Command Line Interface

Zone Command

 

 

 

 

members [zone]

Displays all members of the zone given by [zone]. This keyword is available with User authority and does not require a Zoning Edit session.

remove [zone] [members]

Removes the ports given by [members] from the zone given by [zone]. The [members] can have one of the following formats:

Domain ID and port number pair (Domain ID, Port Number). Domain IDs and port numbers are in decimal. Ports are numbered beginning with 0.

6-character device Fibre Channel address (hex)

16-character hexadecimal worldwide port name (WWPN) with the format xx:xx:xx:xx:xx:xx:xx:xx.

Alias name

rename [zone_old] [zone_new]

Renames the zone given by [zone_old] to the zone given by [zone_new].

type [zone] [zone_type]

Specifies the zone type given by [zone_type] to be assigned to the zone name given by [zone]. If you omit the [zone_type], the system displays the zone type for the zone given by [zone]. [zone_type] can be one of the following:

soft

Name server zone

hardacl

Access control list hard zone

hardvpf

Virtual private fabric hard zone

zonesets [zone]

Displays all zone sets of which the zone given by [zone] is a member. This keyword is available with User authority and does not require a Zoning Edit session.

Examples The following is an example of the Zone List command:

SANbox2 $> zone list

Zone ZoneSet

-------------------

wwn_b0241f

zone_set_1

wwn_23bd31

zone_set_1

wwn_221416

59022-03 D

A-63

Page 153
Image 153
Q-Logic 59022-03 D manual Members zone, Remove zone members, Rename zoneold zonenew, Type zone zonetype, Zonesets zone