Port Statistics Data Window | Q-Logic 59022-03 D specs

			4 – Managing Switches
			Displaying Switch Information


	Table 4-2. Switch Data Window Entries (Continued)

	Entry	Description

	ED Timeout	Error detect timeout value
	Zoning Merge Mode	SW2 Standard or Brocade Proprietary
	Zoning Merge Auto Save	Whether zoning auto save is on (default) or off
	Zoning Default Visibility	Whether zoning visibility is set to All (default) or None
	Temperature	Internal switch temperature °C
	Fan 1 Status	Fan status
	Fan 2 Status	Fan status
	Fan 3 Status	Fan status
	Power Supply 1 Status	Power supply 1 status
	Power Supply 2 Status	Power supply 2 status
	Beacon Status	Whether LEDs on the switch are blinking (on or off).
	Broadcast Support	Whether broadcast support is enabled or disabled
		(default).

4.1.4

Port Statistics Data Window

The Port Statistics data window displays port performance data for the selected ports. To open the Port Statistics data window, choose the Port Stats tab below the data window in the faceplate display. Refer to Table 5-5for a description of the Port Statistics data window entries.

The Statistics pull-down menu is available on the Port Statistics data window, and provides different ways to view detailed port information. Choose the down arrow to open the pull-down menu. Open the pull-down menu and select Absolute to view the total count of statistics since the last switch reset. Select Rate to view the number of statistics counted per second over the polling period. Select Baseline to view the total count of statistics since the last time the baseline was set. Choose the Clear Baseline button to set the current baseline.

4.1.5

Port Information Data Window

The Port Information data window displays port detail information for the selected ports. To open the Port Statistics data window, choose the Port Info tab below the data window in the faceplate display. Refer to Table 5-6for a description of the Port Information data window entries.

59022-03 D

4-5

Image 63

Q-Logic 59022-03 D manual Port Statistics Data Window, Port Information Data Window

Contents

SANbox2 Switch Management User’s Guide Document Revision History SANbox2 Switch Management User’s Guide Table of Contents 11.2 Section Managing Fabrics Section Managing Switches Section Managing Ports Appendix a Command Line Interface Glossary Index Tables Figures Port Statistics Data Window Entries SANbox2 Switch Management User’s Guide 59022-03 D Related Materials Intended Audience Contact Information Technical SupportAvailability Training Management Workstation Requirements Installing SANbox Manager For Windows For Linux Press the Enter key Enter the following command For Solaris SANbox Manager Window Starting SANbox Manager Load Default Fabric View File Window Save Current Fabric View Window Exiting SANbox Manager Changing Default File Password Uninstalling SANbox Manager Preferences Window Setting Preferences Viewing Software Version and Copyright Information Using Online Help SANbox Manager User Interface Topology DisplayFaceplate Display Menu Bar Some menu selections have shortcut keys as shown in TableMenu Shortcut Keys Tool Bar buttons Tool Bar Fabric Tree Fabric Tree Working Status Indicator Graphic WindowData Window and Tabs Switch and Link Status Using the Topology Display Opening the Faceplate Display and Popup Menus Working with Switches and LinksSelecting Switches and Links Moving a Switch in the Display Topology Data Windows Using the Faceplate Display Port Views and Status Working with PortsSelecting Ports Faceplate Data Windows Opening Popup Menus User Authentication SecurityFabric Security Adding a Fabric Managing the Fabric Database Rediscovering a Fabric Removing a FabricOpening a Fabric View File Saving a Fabric View File Adding a New Switch to a Fabric Replacing a Failed Switch in a Fabric Deleting Switches and LinksDisplaying Fabric Information Fabric Status Topology Display Switch and Status Icons Switch communication interrupted Red Active Zone Set Data Window Active Zone Set Data Window Zoning Concepts Zoning a Fabric Soft Zones Zones Access Control List Hard Zones Virtual Private Fabric Hard ZonesAliases Zoning Database Zone Sets Zoning Configuration Merge Mode Default VisibilityAuto Save Restoring Default Zoning Using the Zoning Config Window Zone Merge Failure Recovery Merging Fabrics and ZoningZone Merge Failure Edit Zoning Window Using the Edit Zoning Window Edit Zoning Window Tool Bar Buttons Managing Zone Sets Activating and Deactivating a Zone Set Creating a Zone Set Copying a Zone to a Zone Set Removing a Zone from a Zone Set or from All Zone SetsRemoving a Zone Set Removing All Zoning Definitions Managing ZonesCreating a Zone in a Zone Set Adding Zone Members Removing a Zone from All Zone Sets Renaming a Zone or a Zone SetRemoving a Zone Member Removing a Zone from a Zone Set Changing Zone Types Managing AliasesCreating an Alias Removing an Alias from All Zones Adding a Member to an Alias Displaying Switch Information Managing Switches Faceplate Display Displaying Hardware Status Name Server Data Window Entries Name Server Data Window Switch Data Window Entries Switch Data Window Port Information Data Window Port Statistics Data Window Alarm Log Data Window Configured Zonesets Data Window Configuring a Switch Exporting Alarm Log Information to a FilePaging a Switch Resetting a Switch Chassis Name Switch ConfigurationSwitch Administrative States Switch Administrative States Broadcast Support Domain ID Timeout Values Timeout Values Network Properties Window Network Configuration IP Configuration Parameters IP Configuration Snmp Configuration Snmp Configuration ParametersRemote Logging Snmp Trap Configuration Parameters Snmp Trap ConfigurationConfiguration Backup Configuration Restore Archiving a Switch Reinitializing the Configuration File System Loading Firmware Restoring a Switch Factory Default Configuration Settings Restoring the Factory Default ConfigurationPage Displaying Port Information Managing Ports Monitoring Port Status Displaying Port ModesPort Modes Port Speeds Displaying Port Operational StatesDisplaying Port Speeds Port Operational States Displaying Tranceiver Media Status Transceiver Media ViewPort Statistics Data Window Entries Port Statistics Data Window Entries Port Statistics Data Window Entries Port Info Data Window Entries Port Properties Window Configuring Ports Changing Port Administrative States Port Administrative StatesChanging Port Speeds Changing Port Modes Extending Port Credits Changing TL ModesChanging Buffer-to-Buffer Credits Stream Guard Extended Credits Window Testing Ports Resetting a Port Managing Ports Testing Ports Logging On to a Switch Command Line Interface Command Syntax Command syntax is as followsCommand keyword keyword value Table A-1. Commands Listed by Authority Level Commands Keywords start Admin CommandAuthority Admin Cancel Authority Admin Syntax alias Alias Command Rename aliasold aliasnew Remove alias members Edit config Config CommandSyntax config Keywords activate config Save config Date Command Authority Admin Syntax dateKeywords MMDDhhmmCCYY Examples Fallback CommandAuthority Syntax Keywords Help CommandHelp command keyword Command History Command UserHistory Unpack file Image CommandAuthority Admin Syntax image cleanup Keywords cleanup Lip Command Lip portnumberPortnumber Accountname Passwd CommandAdmin Passwd accountname Displays current system process information Ps CommandExamples The following is an example of the Ps command Authority User Syntax ps Syntax quit, exit, or logout Quit CommandAuthority User Closes the Telnet session Reset Command Authority Admin Syntax reset config factoryKeywords config Table A-3. Port Configuration Defaults Table A-2. Switch Configuration Defaults Table A-3. Port Configuration Defaults Table A-5. System Configuration Defaults Examples The following example clears the list of alarms Set Alarm Clear CommandClears the log list of alarms Syntax set alarm clear Set Beacon Command Set beacon stateState Port portnumber Set Config CommandSet config Table A-6. Set Config Port Parameters Use Arbff instead of idles on loop Table A-7. Set Config Switch Parameters With formatting and current values will follow Table A-8. Set Config Zoning Parameters Mfstov Following is an example of the Set Config Switch command Following is an example of the Set Config Zoning command Clear Set Log CommandSet log Archive Level level Port portsSave Log Stop command StartStop Set Port Command Snmp System Set Setup CommandSet setup Table A-9. Snmp Configuration Settings Table A-10. System Configuration Settings Contact Following is an example of the Set Setup System command Set switch Set Switch Command Keywords about Show Command Log option Perf optionTable A-11. Show Port Parameters LIP Alpd Alps Users Setup optionSteering domainid Topology Following is an example of the Show Fabric command Following is an example of the Show Domains command Following is an example of the Show Topology command Following is an example of the Show Setup Snmp command NL 20000020372b05c9 NL 20000020372b095e NL 20000020372b0920 LIPF8F7 Following is an example of the Show Port command Following is an example of the Show Switch command Displays zoning configuration parameters for the switch Show Config CommandShow config Displays configuration parameters for the switch Following is an example of the Show Config Zoning command Following is an example of the Show Config Switch command Keywords component Show Log Command Following is an example of the Show Log command Following is an example of the Show Log Options command Keywords byte bytes/sec Show Perf CommandDisplays performance data for all ports Syntax show perf Displays the current Snmp settings Show Setup CommandDisplays the current Snmp and system settings Show setup Following is an example of the Show Setup System command Syntax shutdown Shutdown Command Test Command Syntax test portnumber testtype Keywords portnumberTesttype Set port x state online Uptime Command Examples The following is an example of the Uptime commandAuthority User Syntax uptime Delete accountname User CommandAccounts Add Following is an example of the User List command Following is an example of the User Delete command Whoami Command Examples The following is an example of the Whoami commandAuthority User Syntax whoami Syntax zone Zone Command Type zone zonetype Members zoneRemove zone members Rename zoneold zonenew Following is an example of the Zone Zonesets command Following is an example of the Zone Members command Keywords active Zoneset Command Remove zoneset zonelist Rename zonesetold zonesetnewZones zoneset Zoning Command EditOpens a Zoning Edit session Following is an example of the Zoning List command Configured Zoning Information Command Line Interface Zoning Command 59022-03 D Fabric Management Switch BootPClass 2 Service Class 3 Service Power On Self Test Post Input Power LEDOutput Power LED Over Temperature LED Worldwide Name WWN Small Form FactorSmall Form-Factor Pluggable Target SANbox2 Switch Management User’s Guide 59022-03 D Glossary-4 Index Index-2 59022-03 D 59022-03 D Index-3 Index-4 59022-03 D